|
ARPROTEK E-CUBE CF-S968L |
|
Image shown for reference only
|
|
PENTIUM 4 533 MHZ
FSB, DDR 333,
MINI BAREBONE SYSTEM
|
|
|
|
| Shipping
Extra |
|
| ATACOM
Part #:MIPC_ARPR_S9_80 |
|
Price:MIPC_ARPR_S9_80
 |
|
|
|
|
|
|
Dimension (mm):
292(D) x 200 (W) x 186 (H)
Weight:
5.0KG
Chassis Material:
Aluminum
Drive Bay:
5.25" x 1, 3.25" x 2
MainBoard (PCB Printing):
CFI-S96
Graphic:
845GE GMCH
Audio:
AC'97 2.2 6 Channel
Expansion Slot:
PCI x 1, AGP x 1
VGA Share Memory:
DVMT, Max. 64MB
Front Panel I/O:
USB -- 2
Firewire IEEE1394 -- 1
Center/Bass -- 1
Real Out -- 1
MIC -- 1
SPDIF-in -- 1
|
CPU
Support:
Socket 478 (400/533MHz)
Main Chipset:
Intel 82845GE
IDE Interface:
ATA100
Memory:
DDR 200/266/333 x 2
Expansion Slot:
PCI x 1, AGP x 1
Real Panel I/O:
Serial Port -- 1
LAN --1
USB -- 2
1394 -- 2
Line out/headphone -- 1
Line in -- 1
MIC -- 1
SPDIF-out -- 1
VGA -- 1
Power Supply:
220W (PFC optional)
Hot Feautres:
High-Performance system fan |
| |
|
| |
CPU:
Support Intel Socket 478 Pentium 4 processor
Support Intel Socket 478 Celeron processor
400/533MHz Intel NetBurst micro-architecture bus
Core Logic:
Intel 82845GE + ICH4 chipsets
Main Memory:
Two 184-pin DIMM sockets
Support DDR200/266/333 SDRAM up to 2GB
VGA:
Integrated Graphics controller in 845GE GMCH
Supports 3D/2D enhancements
Supports AGP bandwidth.
Audio:
AC-Link with AC’97 2.2 compliant
Software audio with Realtek ALC650 6-channel AC’97 codec,
S/PDIF output supported
USB 2.0:
Integrated USB 2.0 controller in ICH4
Compliant with USB 2.0 specification
Support Hi-speed, Full-speed and Low-speed data transfer rate.
Max. Bandwidth 480Mbits/s
Ethernet:
Realtek RTL8100B 10/100Base-T Ethernet controller
Full-Duplex supported
WFM 2.0 compliant |
Form Factor:
Self-defined @ 262 mm (L) × 180 mm (W), 6 Layers
1394/Firewire:
NEC uPD72873GC 1394a Host controller
Compliant with IEEE 1394 OHCI Specification rev.1.0
Data transfer rate can be 100/200/400Mbps
I/O Interface:
Winbond W83627HF LPC controller
Two enhanced PCI IDE channels which support up to 4 IDE devices
with ATA-100 transfers up to 100MB/sec
Build in FDC supports 1.2M/1.44M/2.88M FDD
Back Panel I/O Output:
SPDIF-OUT optical connector
2 Type A USB connectors, 1 RJ-45 LAN port
2 1394 vertical connectors
2 fast serial ports, 1 D-type 15-pin VGA connector
Line-in, MIC-in, Speaker-out
System BIOS:
Award BIOS with 2MB/4MB EEPROM
ACPI/PnP supported
Front Panel I/O Output Board:
Double desk USB connectors
PS/2 mouse and keyboard connectors
SPDIF-IN optical connector (Optional)
Center/Bass, Rear-out, MIC-in
Board size @ 27 mm (L) x 135 mm (W)
Expansion Slots:
1 PCI slot, 1 AGP4X slot
|
| |
|
 |
- Support Intel Socket 478 Pentium 4/Celeron processor
and 400/533MHz Intel NetBurst micro-architecture bus.
- Intel 82845GE + ICH4 chipsets
- Support DDR200/266/333 SDRAM up to 2GB. Two 184-pin
DIMM sockets
- 220W Power Supply
- Onboard IEEE1394 USB Interface
- Onboard 10/100Base-TX Fast Ethernet
- AC-Link with AC'97 2.2 compliant. Software audio
with Realtek ALC650 6-channel AC'97 codec, S/PDIF
output supported
- Integrated USB 2.0 controller in ICH4. Support Hi-speed,
Full-speed and Low-speed data transfer rate. Max.
Bandwidth 480Mbits/s
CF-S969 features a high-performance Intel Pentium 4 motherboard
CF-S96. The system core logic is based on Intel 82845GE Chipsets.
It is integrated with NEC uPD72873GC 1394a controller and
Realtek RTL8100B Ethernet controller.
|
