| Product SKUs |
| MBD-H8QME-2 |
H8QME-2-O (Standard Retail Pack)
|
| Physical Stats |
| Form Factor |
• Proprietary |
| Dimensions |
16" x 13" (40.6cm x 33.2cm) |
| Processor/Cache |
| CPU |
Quad 1207-pin Socket F
Supports up to four Dual-Core AMD Opteron™ 8000
Series (Socket F) processor(s) |
| System Bus |
1000MHz
HyperTransport |
| Chipset |
nVidia MCP55 Pro
AMD 8132 |
| System Memory |
| Memory Capacity |
Sixteen 240-pin DIMM sockets
Supports up to 32 GB DDR2 667 MHz memory
Supports up to 32 GB DDR2 533 MHz memory
Supports up to 64 GB DDR2 400 MHz memory
Single or Dual (recommended) channel memory support
For Quad CPUs: Recommended that memory be populated
equally in adjacent memory banks
|
| Memory Type |
• DDR2 667/533/400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated
DIMMs |
| DIMM Sizes |
• 256 MB, 512 MB, 1 GB, 2 GB
|
| Memory Voltage |
• 1.8 V only
|
| On-Board Devices |
| SATA |
- nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
| Network Controllers |
Intel® 82546GB Dual Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45
output |
| IPMI |
Intelligent Platform Management Interface v.2.0,
Low Profile
RMM (Remote Management Module)
(Card not included) |
| Super I/O |
Winbond
83627HF |
| VGA |
ATI ES1000 Graphics Controller |
| Input / Output |
| SATA |
• 6 SATA2 ports |
| Floppy |
• 1
Floppy port; 1.44 MB support |
| LAN |
• 2 RJ45 LAN ports |
| USB |
FUCI
Up to 4 USB Ports 2.0 Compliant
2 Rear Ports
2 Internal Headers |
| IDE |
Single EIDE channel support up to two UDMA IDE devices
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA 100/133 |
| Keyboard / Mouse |
• PS/2 keyboard and mouse ports
|
| Serial Ports |
• 1x Fast UART 16550 serial port
• 1x l Header
|
| Parallel
Port |
• 1 ECP / EPP parallel port |
| VGA |
• 1
VGA Port |
| Chassis ( Optimized for
H8QM8-2
) |
| Rackmount
Tower/4U |
•SC748TQ-R1000 |
| Important Note |
• To ensure system stability, a 450W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required.
|
| Expansion Slots |
| PCI-Express |
1 x16 PCI-e Slot
1 x8 PCI-e Slot
|
| PCI-X |
2 64-bit 133/100MHz PCI-X (3.3V) slots
2 64-bit 100MHz PCI-X (3.3V) slot
|
| Hyper
Transport |
2 HyperTransport (HTX) Connectors
|
| System BIOS |
| BIOS Type |
8Mb Flash EEPROM with AMI® BIOS
SST 49LF080A BIOS Chip |
| BIOS Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 2.0
USB Keyboard Support
SMBIOS 2.3 |
| Management |
| Software |
Super Doctor
III
Watch Dog
Optional IPMI (Intelligent Platform Management
Interface) 2.0
|
| Power Configurations |
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) headert
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on |
| PC Health Monitoring |
| CPU |
Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V
Standby, VBAT
CPU 4-Phase-switching voltage reulator |
| FAN |
Total up to 9-fan status tachometer monitoring
Up to nine 3-pin fan headers
Status monitor for speed control
Support 3-pin fans with fan-speed control
Low noise fan speed control
|
| Temperature |
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
PC Temperature Sensing Logic |
| LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
|
| Other Features |
• Chassis Intrusion Detection
• Chassis Intrusion Header
|
