Product SKUs |
|
A+ Server 4710S-T (Beige)
|
Motherboard |
|
Super H8SSL-R10 |
Processor/Cache |
CPU |
Single 939-pin ZIF Sockets
Supports one Dual-Core AMD Opteron™ 100 Series processor
1MB Cache
4 phase VRM |
Chipset |
HyperTransport Link
ServerWorks HT1000 I/O Hub
|
System Memory |
Memory Capacity |
Four 184-pin DIMM sockets
Supports up to 4 GB DDR 400/333 MHz memory or
Single or Dual (recommended) channel memory |
Memory Type |
DDR 400/333MHz unbuffered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
DIMM Sizes |
256 MB, 512 MB, 1GB |
Memory Voltage |
2.5 V only |
Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 Single Device Data Correction (SDDC)
|
On-Board Devices |
SATA |
4 SATA Ports using ServerWorks HT1000 controller
SATA RAID 0, 1, 10 |
IDE |
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA/100
|
IPMI |
1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B) or
For 2U and above: (Optional: AOC-LPIPMI-LANG)
Remote Management Module
(Card not included)
|
Network Controllers |
Broadcom BCM5704C Dual Gigabit Ethernet Controller
Supports 1000BASE-T, RJ45 output |
VGA |
ATI Rage XL 8MB PCI Graphics Controller
VGA Port
|
Super I/O |
NS PC87427
|
Clock Generator |
ICS932S801AG
|
Input / Output |
Serial ATA |
Up to four SATA devices
SATA RAID 0, 1, 10
|
IDE |
Single ATA 100 EIDE channels support up to two UDMA IDE devices
Supports UDMA Mode 5
Supports ATA/100
|
Floppy |
1 Floppy port; 1.44 MB
|
LAN |
2x RJ45 LAN port |
USB |
2 USB Rear Ports
2 USB Internal Headers
USB 2.0 Compliant, 1.1 Compatible
|
VGA |
1x VGA Port |
Keyboard / Mouse |
PS/2 keyboard and mouse ports |
Serial Ports |
1 Fast UART 16550 serial port
1 header |
Chassis |
Form Factor |
Mid-Tower
|
Model |
SC733T-450
|
Dimensions |
Height |
16.8" (427mm) |
Width |
7" (178mm) |
Depth |
• 20.9" (631mm) |
Gross Weight |
• 39
lbs (17.7kg) |
Available Colors |
• Beige, Black |
Front Panel |
Buttons |
Power On/Off button
System Reset button |
LEDs |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Fan Fail LED |
Ports |
2x USB Ports |
Drive Bays |
Hot-swap |
4x 1" SATA hot-swap drive bays |
Peripheral Bay(s) |
2x 5.25" Peripheral Drive Bay
1x 3.5" full-height peripheral bay
|
Peripheral Drives |
Floppy |
3.5" 1.44MB Floppy Drive |
Expansion Slots |
PCI-Express |
1 64-bit 133MHz PCI-X (3.3V) slot
|
PCI-X |
2 PCI 32-bit, 33MHz expansion slots |
SATA Backplane |
BLACKPLANE |
1x 1U Serial ATA backplane |
System Cooling |
Fans |
1x 12cm exhaust thermal fan
1x 9cm mounted thermal cooling fan
2x 8cm fans (450W power
supply configuration
|
Power Supply |
|
450W low-noise AC power supply with redundant cooling feature (with PFC) |
AC Voltage |
100 - 240V, 50 - 60Hz, 7 - 15Amp |
DC
Output |
5V + 3.3V = 160W
12V + 5V + 3.3V = 430W
|
+5V |
30 Amp |
+5V standby |
2.0 Amp |
+12V |
24 Amp |
-12V |
1 Amp |
+3.3V |
30 Amp |
PC Health Monitoring |
CPU |
Monitors CPU Core Voltages, +5V, ±12V, 2.5V Standby, 5V Standby, VBAT
Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
CPU 4-phase Switching Voltage Regulator
Supports System Management Utility
|
FAN |
Total up to five 3-pin fan headers
5 Fan Status Tachometer monitoring
Status Monitor for Speed Control
|
Temperature |
Monitoring for CPU and chassis environment
CPU Thermal Trip support
I2C temperature sensing logic
|
LED |
CPU / Overheat LED
Suspend-state indicator LED
|
Other Features |
Chassis Intrusion Header
|
System BIOS |
BIOS Type |
4Mb Flash EEPROM with AMI® BIOS
SST-49LF004B BIOS Chip
|
BIOS Features |
Plug and Play (PnP)
ACPI 2.0
PCI 2.2
DMI 2.3
BIOS Rescue Hot Keys
SMBIOS 2.3
USB Legacy support
Hardware BIOS Virus Protection
RTC (Real Time Clock) Wakeup
|