Product SKUs |
SYS-6015V-M3B |
SYS-6015V-M3B(Black) |
Motherboard |
|
Super
X7DVL-3 |
Processor/Cache |
CPU |
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s)
of the same type below:
- Dual-Core Intel® Xeon® Processor
5100 sequence (Woodcrest processors) with 2MB
L2 Integrated Advanced Transfer Cache per core,
4MB L2 cache total, up to 3.73 GHz
|
System Bus |
1333 / 1066 / 667 MHz system bus |
System Memory |
Memory Capacity |
Six 240-pin DIMM sockets
Supports up to 16 GB 667 / 533MHz DDR2 ECC FB-DIMM
memory
Dual branch memory bus
Memory must be populated in pairs
No Memory Mirroring support
|
Memory Type |
667
/ 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM
72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes |
512 MB, 1GB, 2GB, 4GB |
Memory Voltage |
1.8 V only
1.5V(AMB) |
On-Board Devices |
Chipset |
Intel® 5000V (Blackford VS) chipset
MCH + ESB2
|
SAS |
- LSI 1068E PCI-E SAS Controller
- 8 SAS Ports supporting up to 8 SAS HDD
- RAID 0, 1, 10 support
|
IPMI |
Support for Intelligent Platform Management
Interface v.2.0
200-pin IPMI slot
( Optional:
AOC-SIMLC )
NOTE: KVM-over-LAN not supported - there is
no DVO signal to the IPMI slot
|
Network Controllers |
Two Intel® (ESB2/Gilgal) 82563EB Single-Port
Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output
|
Graphics |
XGI Volari™ Z7 PCI-E Graphics Processor |
Super I/O |
Winbond 83627HF chip |
Clock
Generator |
ICS932S401EGLF |
Expansion
Slots |
PCI-X |
1x 64-bit PCI-X 133MHz or PCI-e x8 slot (Riser card
required) |
Input / Output |
Serial ATA |
Six Serial ATA ports
Six SATA hard drives supported
|
IDE |
Single EIDE channel supports up to two UDMA
IDE devices (IDE-M, IDE-S)
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy |
1 Floppy controller; 1.44 MB |
LAN |
2x RJ45 LAN port |
USB |
2x USB rear ports
2x USB internal headers for up to 4-ports
Total 6 USB 2.0 Compliant / 1.1 Compliant
|
VGA |
1x VGA Port |
Keyboard / Mouse |
PS/2 keyboard and mouse ports |
Serial Ports |
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
|
Parallel Port |
1
Header for ECP / EEP parallel port |
Chassis |
Form Factor |
1
U Rackmount |
Model |
SC813MTQ-520C |
Dimensions |
Height |
1.7" (43mm) |
Width |
17.2" (438mm) |
Depth |
19.8" (504mm)
|
Gross Weight |
38 lbs (17.2kg) |
Available Colors |
Beige, Black |
Front Panel |
Buttons |
Power On/Off button
System Reset button |
LEDs |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Fan Fail LED |
Ports |
2x USB Ports (USB 2.0 Ready)
1x Serial COM Port
|
Drive Bays |
Hot-swap |
4x Hot-swap SAS drive bays
|
Peripheral
Drives |
DVD-ROM |
Slim 8x DVD, 24x CD, DVD-ROM drive
|
SATA
Backplane |
Backplane |
1U SAS/SATA Backplane
|
System
Cooling |
Fans |
4x 4cm cooling fans |
Power Supply |
|
520W
AC to DC power supply w/ PFC
|
AC Voltage |
100
- 240V, 50 - 60Hz, 7 - 3Amp
|
+5V |
20 Amp |
+5V standby |
3 Amp |
+12V |
39 Amp |
-12V |
0.5 Amp |
+3.3V |
16 Amp |
System BIOS |
BIOS Type |
8Mb Flash EEPROM with Phoenix® BIOS |
BIOS Features |
Plug and Play (PnP)
SMBIOS 2.3
DMI 2.3
PCI 2.2
ACPI 1.0
BIOS rescue hot keys
USB Keyboard support
Hardware BIOS Virus protection
|
PC Health Monitoring
|
CPU |
Monitors for CPU Cores, +3.3V, +5V, ±12V
4-Phase-switching voltage regulator with auto-sense
from 0.8375V-1.60V
Adjustable CPU Clock Frequency Ratio
|
FAN |
Total of six proprietary 4-pin fan headers supporting
up to 6 fans
6x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
3-pin fan support
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
|
Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 6x fan connectors
PSU I 2 C temperature sensing logic
Thermal Monitor 2 (TM2) support
|
LED |
CPU / System Overheat LED
Supsend-State Indicator LED
+5V Standby Alert LED
|
Other
Features |
Chassis intrusion detection
Chassis intrusion header
SDDC Support |