| Model
|
| Brand
|
Supermicro |
| Model
|
SYS-6015TC-TB |
| Processor/Cache |
| Motherboard |
Super X7DCT + Super X7DCT |
| Processors |
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence (Harpertown
/Clovertown processor)
up to 3.16 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
| System Bus |
1333 / 1066 MHz system bus |
| Operating System Software |
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems |
| System Memory (per Node)
|
| Memory Capacity |
Six 240-pin DIMM sockets
Supports up to 48 GB 667/533MHz DDR2 ECC Register DIMM memory
Dual channels memory bus |
| Memory Type |
677/533MHzECC Register DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Size |
1GB, 2GB, 4GB, 8GB** |
| Memory Voltage |
1.8V only |
| Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices (per Node) |
| Chipset |
Intel® 5100 (San Clemente) chipset
Intel® ICH9R SB |
| SATA |
Intel ICH9R SB SATAII Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux) |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 / 1.5
200-pin IPMI slot (SIMSO(+)) |
| Nerwork Controllers |
Intel® 82573V & 82573L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking |
| Graphics |
ATI ES1000 controller with 32 MB of video memory |
| Super I/O |
Winbond W83627HG chip |
| Clock Generator |
ICS9LPR501 chip |
| Input / Output (per Node) |
| Serial ATA |
Four Serial ATA ports
Four SATA hard drives supported |
| LAN |
2x RJ45 LAN ports |
| USB |
2 rear + 1 Type A connector + 2 headers (2 Ports)
5 total USB ports, 2.0 Compliant / 1.1 Compliant |
| VGA |
1x VGA Port |
| Serial Port/ Header |
1 Fast UART 16550 serial port |
| System BIOS |
| BIOS Type |
16Mb SPI Flash with Phoenix ® BIOS |
| BIOS Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0/3.0
USB Keyboard support
Hardware BIOS Virus protection |
| Chassis |
| Form Factor |
1U Rackmount |
| Model |
SC808T-780 |
| Dimensions
|
| H x W x D |
1.7" x 17.2" x 27.75" |
| Gross Weight |
40 lbs (18.1kg) |
| Front Panel (per Node) |
| Buttons |
Power On/Off button
System Reset button |
| LEDs |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED |
| Expansion Slots (per Node) |
| PCI-Express |
1 (x16) PCI-e slot (Low Profile) |
| Drive Bays (per Node)
|
| Hot-swap |
2x 3.5" SATA Hot-swap drive bays
|
| SATA Backplane
|
| SATA Backplane |
1U SATA Backplane |
| System Cooling |
| Fans |
6x Cooling Fans |
| Power Supply |
| Power Supply |
700W / 780W AC-DC power supply w/ PFC |
| AC Input |
100-240V, 60-50Hz, 9.5-3.5Amp |
| +5V sb |
4 Amp |
| +12V |
65 Amp @ 180-240Vac
58 Amp @ 100-140Vac |
| Management |
| Software |
Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
Super Doctor III
Watch Dog
NMI |
| Power Configurations |
CPI Power Management
Main Switch Override Mechansim
Power-on mode for AC power recovery |
| PC Health Monitoring |
| CPU |
Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT
CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN |
- Total of three 4-pin fans
- 3x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI |
| LED |
CPU / System Overheat LED
Suspend-state Indicator LED |
| Other Features |
SDDC Support |
