| Product SKUs |
| SYS-7045A-3 |
SYS-7045A-3(Beige) |
| Motherboard |
|
Super
X7DA3 |
| Processor/Cache |
| CPU |
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s)
of the same type below:
- Dual-Core Intel®
Xeon®Processor
5300/5100/5000
sequence (Clovertown
/Woodcrest/Dempsey processor) up to 3.73 GHz
|
| System Bus |
1333 MHz, 1066 & 667 MHz system bus |
| System Memory |
| Memory Capacity |
Eight 240-pin DIMM sockets
Supports up to 32 GB 667 / 533MHz DDR2
ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Mirroring supported
|
| Memory Type |
667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated
DIMMs
|
| DIMM Sizes |
512
MB, 1GB, 2GB, 4GB |
| Memory Voltage |
1.8 V only
1.5V(AMB)
|
| On-Board Devices |
| Chipset |
Intel® 5000X (GreenCreek) chipset
MCH + PXH-V + ESB2
|
| SAS |
Adaptec AIC-9410W Serial-Attached SCSI (SAS) Controller
SAS Dual-Channel (internal)
Each SAS channel supports up to 4 SAS / SATA drives
for a total of up to 8 SAS or SATA hard drives
Host RAID 0, 1, & 10 support
|
| RAID |
Support for Zero-Channel
RAID with Supermicro All-In-One-ZCR
Card : AOC-LPZCR2
RAID 0, 1, 5, 10
Optional: (Card NOT included)
|
| IPMI |
Support for Intelligent
Platform Management Interface
v.2.0
200-pin IPMI slot (SIMLP)
( Optional:
AOC-SIMLP-B )
( Optional:
AOC-SIMLP-3 ) with
3rd LAN support
NOTE: KVM-over-LAN not
supported - there is no DVO
signal to the IPMI slot
|
| Network Controllers |
Intel® 82563EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output
Intel® I/OAT support for fast, scaleable, and
reliable networking
|
| Graphics |
N/A |
| Super I/O |
Winbond 83627HG chip
|
| Expansion
Slots |
| PCI-Express |
1 (x16) PCI-e slot
1 (x4) PCI-e (using x16) slot
|
| PCI-X |
2x 64-bit 133/100MHz PCI-X (3.3V) slots
1x 64-bit 100MHz PCI-X (3.3V) slot
|
| PCI |
1x 32-bit 33MHz PCI (5V) slot |
| Input / Output |
| IDE |
Single EIDE channel supports up to
two UDMA IDE devices(IDE-M, IDE-S) including
CF card
Supports UDMA Mode 5, PIO Mode 4, and
ATA/100
Compact Flash (40-pin connector, IDE
1, single channel) slot
|
| Floppy |
1 Floppy controller; 2.88 MB |
| LAN |
2x RJ45 LAN port |
| USB |
4x USB rear ports
2x USB internal header
6 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| Audio |
AC97 Audio |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| Serial Ports |
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
|
| Parallel Port |
1x
ECP / EEP Parallel Header |
| Chassis |
| Form Factor |
4U Rackmountable / Tower
Optional Rackmount Kit (CSE-PT26)
|
| Model |
SC743TQ-645
|
| Dimensions |
| Height |
7" (178mm) |
| Width |
17.8" (452mm) |
| Depth |
25.5" (647mm)
|
| Gross Weight |
63 lbs (28.6kg) |
| Available Colors |
Beige, Black |
| Front Panel |
| Buttons |
Power On/Off button
• System Reset button |
| LEDs |
Power LED
Hard drive activity LED
Network activity LEDs
System Overheat / Fan Fail LED |
| Ports |
2x
USB Ports
|
| Drive Bays |
| Hot-swap |
8x SAS Hot-swap Drives
|
| Peripheral
Bay(s) [90 o Rotatable] |
- 2x 5.25" Peripheral Drive
Bay
- 1x 5.25" Bay For Floppy
Drive
| Peripheral
Drives |
| DVD-ROM |
N/A
|
| Floppy |
- Panasonic 3.5" 1.44MB Floppy Drive
|
| SATA
Backplane |
| Backplane |
SC743 SAS / SATA Backplane w/ Enclosure Management
|
| System
Cooling |
| Fans |
- 4x 5000 RPM Hot-swappable PWM Cooling Fans
- 1x 4000 RPM Hot-Swappable Rear Exhaust PWM
Fan
- 1x Air Shroud
|
| Power Supply |
|
645W
Low-Noise AC power supply with PFC
[ 24-pin, (4-pin, 8-pin) = 12V ]
|
| AC Voltage |
100
- 240V, 50 - 60Hz, 11 - 5Amp
|
| DC
Output |
5V + 3.3V = 160W |
| +5V |
30 Amp |
| +5V standby |
4 Amp |
| +12V |
46 Amp |
| -12V |
0.6 Amp |
| +3.3V |
30.0 Amp |
| System BIOS |
| BIOS Type |
8Mb Flash EEPROM with Phoenix® BIOS |
| BIOS Features |
Plug and Play (PnP)
SMBIOS 2.3
DMI 2.3
PCI 2.2
ACPI 1.0
PCI-X 1.0
USB Keyboard support
Hardware BIOS Virus protection
|
|
PC Health Monitoring
|
| CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V,
-12V & +5V Standby, VBAT
CPU Core 5-Phase-switching voltage regulator
with auto-sense from 0.8375V-1.60V
|
| FAN |
Total of eight 4-pin fans
8x fans with status monitoring
Status monitor for speed control
Status monitor for on/off control
Support for 3-pins (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
Monitoring for CPU and chassis, environment
CPU thermal trip support
Thermal Control for 6x Fan Connectors
I 2 C temperature sensing logic
Thermal Monitor 2 (TM2) support |
| LED |
CPU / System Overheat LED
+5V Standby alert LED
Suspend-state indicator LED |
| Other
Features |
Chassis intrusion detection
Chassis intrusion header
SDDC Support |
|
