| Product SKUs |
| MBD-H8SSL-R10-B |
• H8SSL-R10 (Bulk Pack)
|
| Physical Stats |
| Form Factor |
• ATX
|
| Dimensions |
• 12.0" x 8.0" (30.5cm x 20.3cm)
|
| Processor/Chipset |
| CPU |
• Single 939-pin ZIF Sockets
• Supports one Dual-Core AMD Opteron™ 100 Series
processor
• 1MB Cache
• 4 phase VRM
|
| Chipset |
• HyperTransport Link
• ServerWorks HT1000 I/O Hub
|
| System Memory |
| Memory Capacity |
• Four 184-pin DIMM sockets
• Supports up to 8 GB DDR 400/333 MHz memory or
• Single or Dual (recommended) channel memory
|
| Memory Type |
• DDR 400/333MHz unbuffered ECC SDRAM 72-bit, 184-pin
gold-plated DIMMs
|
| DIMM Sizes |
• 256 MB, 512 MB, 1GB, 2GB
|
| Memory Voltage |
• 2.5 V only
|
| Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
|
| On-Board Devices |
| SATA |
• 4 SATA Ports using ServerWorks HT1000 controller
• SATA RAID 0, 1, 10
|
| IDE |
• Supports UDMA Mode 5
• Supports PIO Mode 4
• Supports ATA/100
|
| IPMI |
• 1U support: Intelligent Platform Management Interface
v.2.0+ ( Optional:
1UIPMI-B ) or
• For 2U and above: ( Optional:
AOC-LPIPMI-LANG )
• Remote Management Module
• (Card not included)
|
| Network Controllers |
• Broadcom BCM5704C Dual Gigabit Ethernet Controller
• Supports 1000BASE-T, RJ45 output
|
| VGA |
• ATI Rage XL 8MB PCI Graphics Controller
• VGA Port
|
| Super I/O |
• NS PC87427
|
| Clock Generator |
• ICS932S801AG
|
| Chassis ( Optimized
for H8SSL-R10 ) |
| 1U Chassis |
• SC512C-260 *
• SC811T-300 **
* Please use air-shroud CSE-PT0112
** Please use air-shroud CSE-PT0113
(Air-shrouds sold separately) |
| Important Chassis
Notes |
• To ensure system stability, a 420W (minimum) ATX
power supply
[4-pin (+12V) and 24-pin are required]
|
| Expansion Slots |
| PCI-X |
• 1 64-bit 133MHz PCI-X (3.3V) slot
|
| PCI |
• 2 PCI 32-bit, 33MHz expansion slots
|
| Input / Output |
| SATA |
• Up to four SATA devices
• SATA RAID 0, 1, 10
|
| IDE |
• Single ATA 100 EIDE channels support up to two
UDMA IDE devices
• Supports UDMA Mode 5
• Supports ATA/100
|
| Floppy |
• 1 Floppy port; 1.44 MB
|
| LAN |
• 2 RJ45 LAN ports
|
| USB |
• 2 USB Rear Ports
• 2 USB Internal Headers
• USB 2.0 Compliant, 1.1 Compatible
|
| Keyboard / Mouse |
• PS/2 keyboard and mouse ports
|
| Serial Ports |
• 1 Fast UART 16550 serial ports
• 1 Header
|
| System BIOS |
| BIOS Type |
• 4Mb Flash EEPROM with AMI® BIOS
• SST-49LF004B BIOS Chip
|
| BIOS Features |
• Plug and Play (PnP)
• ACPI 2.0
• PCI 2.2
• DMI 2.3
• BIOS Rescue Hot Keys
• SMBIOS 2.3
• USB Legacy support
• Hardware BIOS Virus Protection
• RTC (Real Time Clock) Wakeup
|
| Management |
| Software |
• Optional IPMI (Intelligent Platform Management
Interface) 2.0
• Super
Doctor III
• Watch Dog / NMI
|
| Power Configurations |
• ACPI/API Power Management
• Wake-On-Ring (WOR) header
• Wake-On-LAN (WOL) header
• Main Switch Override Mechanism
• Keyboard Wakeup from Soft-Off
• CPU Fan auto-off in sleep mode
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on
|
| PC Health Monitoring |
| CPU |
• Monitors CPU Core Voltages, +5V, ±12V, 2.5V
Standby, 5V Standby, VBAT
• Monitor for HyperTransport voltage 1.2V, DDR termination
1.25V
• CPU 4-phase Switching Voltage Regulator
• Supports System Management Utility
|
| FAN |
• Total up to five 3-pin fan headers
• 5 Fan Status Tachometer monitoring
• Status Monitor for Speed Control
|
| Temperature |
• Monitoring for CPU and chassis environment
• CPU Thermal Trip support
• I 2 C temperature sensing logic
|
| LED |
• CPU / Overheat LED
• Suspend-state indicator LED
|
| Other Features |
• Chassis Intrusion Header
|
