Product SKUs |
MBD-H8DMR-i2 |
H8DMR-i2-O(Retail pack)
|
Physical Stats |
Form Factor |
Extended ATX |
Dimensions |
12" x 13.05" (30.5cm x 33.2cm) |
Processor/Cache |
CPU |
Quad 1207-pin Socket F
Supports up to two AMD Opteron 2000 Series
(Socket F) processor(s) |
System Bus |
1000MHz
HyperTransport |
Chipset |
nVidia MCP55 Pro
NEC uPD720400
|
System Memory |
Memory Capacity |
Eight 240-pin DIMM sockets
Supports up to 16 GB DDR2 667 MHz memory
or
Supports up to 16 GB DDR2 533 MHz memory
or
Supports up to 32 GB DDR2 400 MHz memory
or
Single or Dual (recommended) channel
memory support
For Single CPU: Memory must be populated
in CPU1 DIMMs only
For Dual CPUs: Recommended that memory
be populated equally in adjacent memory
banks
|
Memory Type |
• DDR2 667/533/400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated
DIMMs |
DIMM Sizes |
• 256
MB, 512 MB, 1 GB, 2 GB , 4GB |
Memory Voltage |
• 1.8 V only
|
Error
Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
On-Board Devices |
SATA |
nVidia MCP55 Pro SATA2 3.0Gbps Controller
6 SATA Ports
nVidia RAID 2.0
SATA RAID 0, 1, 0+1, 5, JBOD Support
|
Network Controllers |
nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet
Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output
|
IPMI |
1U support: Intelligent Platform Management Interface
v.2.0+ ( Optional:
AOC-SIM1U )
Remote Management Module
(Card not included) |
Super I/O |
Winbond
83627HF |
Graphics |
ATI ES1000 graphics controller |
Input / Output |
Serial
ATA |
Six SATA2 Ports
Six SATA2 hard drives supported
|
IDE |
Single EIDE channel support up to two UDMA IDE
devices
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA 100/133 |
Floppy |
• 1
Floppy port; 1.44 MB support |
LAN |
• 2 RJ45 LAN ports |
USB |
FUCI
Up to 4 USB Ports 2.0 Compliant
2 Rear Ports
2 Internal Headers |
VGA |
1 VGA port |
Keyboard / Mouse |
• PS/2 keyboard and mouse ports
|
Serial Ports |
• 1
Fast UART 16550 serial port/
1 header
|
Chassis (
Optimized for
H8DMR-i2
) |
1U Chassis |
SC815TQ+-560 |
Important Note |
• To ensure system stability, a 450W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required.
|
Expansion Slots |
Universal
PCI-e / PCI-X |
2 Universal PCI-e / PCI-X Slots |
Slot
1 |
1 PCI-express x8 Slot OR
1 64-bit 100MHz PCI-X slot |
System BIOS |
BIOS Type |
8Mb Flash EEPROM with AMI® BIOS
SST49LF080A BIOS Chip |
BIOS Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 2.0
USB Keyboard Support |
Management |
Software |
Super Doctor
III
Watch Dog
Optional IPMI 2.0
|
Power Configurations |
ACPI Power Management
Wake-On-Ring (WOR) headert
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
CPU Fan auto-off in sleep mode
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on
Main Switch Override Mechanism
|
PC Health Monitoring |
CPU |
Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V,
5V Standby, HyperTransport Link voltage 1.2V, memory
voltage 1.8V, VBAT
CPU 4-Phase-switching voltage reulator |
FAN |
Total up to 5-fan status tachometer monitoring
Up to five 3-pin fan headers
Status monitor for speed control
Stauts monitor for on/off control
Support 3-pin fans with fan-speed control
Low noise fan speed control
Overheat backup fan connector
|
Temperature |
Monitoring for CPU and chassis environment
CPU Thermal Trip Support I 2 C Temperature Sensing Logic
|
LED |
CPU / System Overheat LED
Suspend-State Indicator LED
+5V Standby Alert LED |
Other Features |
• Chassis Intrusion Detection
• Chassis Intrusion Header
|