Graphics
card compatibility:
retention mechanism
The MCW40 retention mechanism uses NVidia® 's four
mounting holes standard, as specified in GeForce GPU's.
The product can also be installed with other graphics processors
by using permanent bonding agents, such as thermally conductive
epoxies. Due to the wide variety of graphics card configurations
in the industry, Swiftech does not guarantee compatibility.
Users should check the dimension specifications provided below
and compare them to their board layout in order to assure a
successful assembly.
MCW40 Specifications
Housing:
CNC machined aluminum
Internal chamber capacity: 1 in3 (16 cc)
Type II, class 2 blue anodized anti-corrosion treatment
Built-in quick-connect fittings for 3/8" OD tubing (1/4"
ID)
Base plate:
0.135" thick CNC machined copper plate
Inner face featuring variable size dimples to promote turbulent
flow
The Outer face is lapped, and polished to an 8 Micro Surface
finish to optimize heat transfer.
Assembly:
Overall dimensions: L2.5" x W2.0" x H0.73"
(L63.5 x W51 x H18.5 mm)
Retention mechanism: 4 spring loaded 4-40 S/S socket screws,
providing ~20 lb of pressure overall
Tubing compatibility: 3/8" OD (1/4" ID), tube inserts
included for use with soft vinyl tubing.
Assembly:
Overall dimensions: L2.5" x W2.0" x H0.73"
(L63.5 x W51 x H18.5 mm)
Retention mechanism: 4 spring loaded 4-40 S/S socket screws,
providing ~20 lb of pressure overall
Tubing compatibility: 3/8" OD (1/4" ID). Tube inserts
included for mandatory use with soft tubing:
Optional Fittings:
3/8" Tube OD Elbows (swivel)
3/8" Tube ID Hose barb adapter
1/2" Tube ID Hose barb adapter
Examples of installation (click on picture to enlarge):
Gainward Ultra/750XP GeForce4 TI 4600
MSI G4Ti 4600-VTD GeForce4 TI 4600
MCW40-T Thermo-electric assembly specifications
Preamble:
The MCW40-T uses a built-in thermo-electric
module to refrigerate the processor below ambient temperature.
This unit is intended for advanced users and requires appropriate
insulation to prevent the formation of condensation in sensitive
areas of the graphics card. Whereas Swiftech provides gaskets,
and specific installation instructions for such assembly, utilization
of this device is at the sole risk of the user.
Housing: same as MWC40
Smooth Base plate:
0.135" thick CNC machined copper plate
Inner and outer faces are lapped, and polished to an 8 Micro
Surface finish
Thermo-electric modules specifications:
L40xW40xH3.5mm
Qmax: 80.3 w
Imax: 8 amps
Umax: 15.2 v
?Tmax: 65 °C
Important note: while users may replace the thermo-electric
for different power modules, the MCW40-T can ONLY be
used with 40x40mm size modules.
Assembly:
Overall dimensions: L2.5" x W2.0" x H0.87"
(L63.5 x W51 x H22.2 mm)
Retention mechanism: 4 spring loaded 4-40 S/S socket screws,
providing ~20 lb of pressure overall
Tubing compatibility: 3/8" OD (1/4" ID), tube inserts
included for use with soft vinyl tubing.
|