Motherboard

Super P3TDL3


Processor/Cache

CPU • Dual FCPGA370 ZIF Sockets
• Supports an Intel® Pentium® III processor with 512KB of integrated Advanced Transfer Cache up to 1.4GHz

System Bus 133MHz/100MHz system bus


System Memory

Memory Capacity • Four 168-pin DIMM sockets
• Supports up to 4 GB of PC133/100 memory

Memory Type • PC133/100 72-bit registered ECC SDRAM, 168-pin gold-plated DIMMs

DIMM Sizes 64 MB, 128 MB, 256 MB, 512 MB, 1 GB

Memory Voltage 2.5 V only


On-Board Devices

Chipset • Serverworks™ Serverset III LE chipset
• CNB30LE + OSB4/OSB5

SCSI • Adaptec AIC-7892 Controller
• Single-Channel Ultra160 SCSI

Network Controllers • 2x Intel® 82559 10/100 Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

Graphics ATI Rage XL SVGA PCI video controller with 8 MB of video memory


Input / Output

PCI Expansion • 2x 64-bit 66/33MHz PCI (3.3V) slots
• 2x 32-bit 33MHz PCI (5V) slots

IDE • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100

USB Up to 2 USB ports

Serial Ports 2 Fast UART 16550 serial ports

Parallel Port Port header provided; parallel cable required for parallel port

Floppy 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support

Keyboard / Mouse PS/2 keyboard and mouse ports


System BIOS

BIOS Type 4Mb Flash EEPROM with AMI® BIOS

BIOS Features • Plug and Play (PnP)
• APM 1.2
• DMI 2.1
• PCI 2.2
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
• USB Keyboard support

Chassis

Form Factor Pedestal Server Tower

Model SC830-W


Dimensions

Height 19.9" (505mm)

Width 15.0" (381mm)

Depth 22.8" (579mm)

Gross Weight 104 lbs (47.3kg)

Available Colors Beige, Black


Front Panel

Buttons • Power On/Off button
• System Reset button

LEDs • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power Fail LED


Drive Bays

Hot-swap • 4x 1" SCA Ultra320/160 Hot-swap Drives

Peripheral Bay(s) • 9x 5.25" Peripheral Drive Bays
• 2x 3.5" Peripheral Drive Bays


SCSI Backplane

SCAU160 SCA SCSI Backplane for Pedestal Chassis


System Cooling

Fans • 4x 90mm Hot-swappable Fans
• 2x 90mm Rear Exhaust Fan


Power Supply

300W + 300W Redundant Hot-swap AC power supply w/ PFC

+5V 30.0 Amp

+5V standby 1.5 Amp

+12V 12.0 Amp

+3.3V 15.0 amp


PC Health Monitoring

CPU • Monitors for CPU Cores, +5, ±12V
• CPU Core auto-switching voltage regulator w/ auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via BIOS)

FAN • Total of seven 3-pin fan headers
• 2x fans with tachometer monitoring
• Status monitor with firmware/software on/off control

Temperature • Monitoring for CPU, chassis, environment

LED • CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED

Other Features • Chassis intrusion detection (through LDCM)
• Chassis intrusion header