| Motherboard |
|
• Super X6DH3-G2 |
| Processor/Cache |
| CPU |
• Dual 604-pin FC-mPGA4 Sockets
• Supports up to two Intel® 64-bit Xeon processor(s)
of the same type below:
• Xeon (Nocona) CPU with 1MB L2 Integrated
Advanced Transfer Cache, up to 3.60 GHz
• Xeon (Irwindale) CPU with 2MB L2 Integrated
Advanced Transfer Cache, up to 3.60 GHz
• Xeon LV (Low Voltage) CPU , up to 2.8 GHz |
| System Bus |
• 800 MHz system bus |
| Operating System
Software |
• Supports 64-bit Operating Systems
• Supports 32-bit Operating Systems |
| System Memory |
| Memory Capacity |
• Eight 240-pin DIMM sockets
• Supports up to 16 GB DDRII 400MHz memory
• Dual channel memory bus
• Memory must be populated in pairs
• Single-rank modules are recommended for 6+ DIMM
support |
| Memory Type |
• DDRII 400MHz buffered (registered) ECC SDRAM 72-bit,
240-pin gold-plated DIMMs |
| DIMM Sizes |
• 2GB |
| Memory Voltage |
• 1.8 V only |
| Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 Single Device Data Correction
(SDDC) |
| On-Board Devices |
| Chipset |
• Intel® E7520 chipset
• MCH + 6300ESB + PXH/V + 82541PI |
| SAS |
• Adaptec AIC9410: Adaptec 8-port SAS Controller
• RAID 0, 1, JBOD support |
| SATA |
• 6300ESB 2-port SATA Controller |
| SAS ZCR |
• Supermicro
All-In-One ZCR card: AOC-LPZCR1
• (Optional Card)
• RAID 0, 1, 5, 10, and JBOD support |
| IPMI |
• Support for Intelligent Platform Management Interface
v.2.0
• ( Optional:
AOC-IPMI20-E )
|
| Network Controllers |
• Dual Intel® 82541PI Single-Port Gigabit Controller |
| Graphics |
• ATI Rage XL SVGA PCI video controller with 8 MB
of video memory |
| Super I/O |
• Winbond 83627HF chip |
| Input / Output |
| Serial ATA / SAS |
• Two SAS connectors support up to 8 SAS or SATA
drives
• Two SATA connectors support 2 SATA drives |
| IDE |
• Dual EIDE channels support up to four UDMA IDE
devices
• Supports ATA/100 |
| Floppy |
• 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| LAN |
• 2x RJ45 LAN port |
| USB |
• 2x USB rear ports
• 2x USB internal headers
• USB 2.0 Compliant / 1.1 Compliant |
| VGA |
• 1x VGA Port |
| Keyboard / Mouse |
• PS/2 keyboard and mouse ports |
| Serial Ports |
• 1 Fast UART 16550 serial ports
• 1 header |
| Chassis |
| Form Factor |
• 2U Rackmount |
| Model |
• SC823T-550LP |
| Dimensions |
| Height |
• 3.5" (89mm) |
| Width |
• 16.8" (426mm) |
| Depth |
• 25.6" (650mm) |
| Gross Weight |
• 51 lbs (23.1kg) |
| Available Colors |
• Beige, Black |
| Front Panel |
| Buttons |
• Power On/Off
button
System Reset button |
| LEDs |
• Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED |
| Ports |
• 2x USB Ports
(optional) |
| Expansion Slots |
| PCI-Express |
• 2 (x8) PCI-e slots |
| PCI-X |
• 1x 64-bit 133MHz PCI-X (3.3V) slot
• 2x 64-bit 100MHz PCI-X (3.3V) slots |
| PCI |
• 1x PCI slot |
|
• (Low-profile Add-on Cards Only) |
| Drive Bays |
| Hot-swap |
• 6x 1" SATA
Hot-swap drive trays |
| Peripheral Bay(s) |
• 1x 5.25" full-height
peripheral bay |
| Peripheral Drives |
| CD-ROM |
• TEAC Slim
24x CD-ROM drive |
| Floppy |
• 3.5" 1.44MB
Floppy Drive |
| Backplane |
| Backplane |
1x 2U SAS Backplane (without
SESII) |
| System Cooling |
| Fans |
• 4x 80mm
6300 RPM fans
Cooling redundancy with fan shroud |
| Power Supply |
| Power
Supply |
550W power
supply with PFC [ 24-pin, (8-pin, 4-pin)=12V ] |
| AC Voltage |
• 100 - 240V, 47-63Hz, 9/3.5 Amp |
| DC Output |
• +5V & +3.3V : Max = 50A |
| +5V |
• 35.0 Amp |
| +5V standby |
• 2.0 Amp |
| -5V |
• 0.8 Amp |
| +12V |
• 42.0 Amp |
| -12V |
• 1.0 Amp |
| +3.3V |
• 30.0 Amp |
| System BIOS |
| BIOS Type |
• 8Mb Flash EEPROM with Phoenix® BIOS |
| BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• Fan Speed Control |
| PC Health Monitoring |
| CPU |
• Monitors for CPU Cores, CPU0, CPU1, +3.3V, +5V, ±12V |
| FAN |
• Total of four 4-pin fan headers and four 3-pin
fan headers
• 8x fans with tachometer status monitoring
• Low noise fan speed control |
| Temperature |
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Monitor 2 (TM2) support |
| Other Features |
• Chassis intrusion detection
• Chassis intrusion header |
