Processor:
• Dual mPGA700 ZIF Sockets
• Supports up to two Intel® Itanium® processor(s)
with 6MB Integrated Advanced Transfer Cache up to 1.50GHz
System Bus:
400MHz system bus
Memory Capacity:
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR200 memory
• 4-Way Interleaved Memory
• 4x Memory Modules must be populated at the same time
Memory Type:
• DDR200 registered ECC SDRAM 72-bit, 184-pin gold-plated
DIMMs
Chipset:
• Intel® E8870 chipset
• SNC + SIOH + MRH_D + SPS + ICH4 + P64H2
SCSI:
• LSI Logic SCSI Controller
• Dual-Channel Ultra320 SCSI
Network Controllers:
• 1x Intel® 82546EB
Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45
output
Graphics:
• ATI Rage XL SVGA PCI
video controller with 8 MB of video memory
Expansion Slots:
• 3x full-height, full-length
64-bit 133/100MHz PCI-X expansion slots (with Riser Card)
IDE:
• Dual EIDE channels support
up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
USB:
• Up to 6x USB 2.0 ports |
Seriel
Ports:
• 1x External Serial Port
• Internal header supporting 2x Fast UART 16550 serial
ports
BIOS Type:
6MB AMI® Flash BIOS (total
of 6x BIOS Chips)
BIOS Features:
• Plug and Play (PnP)
• SMBIOS 2.3
• PCI 2.2
• ACPI 1.0 (limited)
• Hardware BIOS virus protection
Chassis:
Form Factor 2U Rackmount
Model SC823HS-R500RC
Dimensions:
Height 3.5" (89mm)
Width 16.7" (424mm)
Depth 25.7" (653mm)
LEDs:
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED
Drive Bays:
• 6x 1" SATA Hot-swap
drives
Peripheral Bay(s):
• 1x 5.25" full-height
peripheral bay
SCA Backplane:
• 1x 2U SCSI backplane
(with SAF-TE)
Fans:
• 4x 80mm 6300 RPM fans
Power Supply:
Redundant 2U 500W AC power supply
w/ PFC
[ 24-pin, (8-pin, 4-pin)=12V) ] |