Processor:
• Dual mPGA700 ZIF Sockets
• Supports up to two Intel® Itanium® processor(s)
with 6MB Integrated Advanced Transfer Cache up to 1.50GHz
System Bus:
400MHz system bus
Memory Capacity:
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR200 memory
• 4-Way Interleaved Memory
• 4x Memory Modules must be populated at the same time
Memory Type:
• DDR200 registered ECC SDRAM 72-bit, 184-pin gold-plated
DIMMs
DIMM Sizes:
• 512 MB, 1 GB, 2 GB
Memory Voltage:
• 2.5 V only
Chipset:
• Intel® E8870 chipset
• SNC + SIOH + MRH_D + SPS + ICH4 + P64H2
Network Controllers:
• 1x Intel® 82546EB Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45
output
Graphics:
• ATI Rage XL SVGA PCI video controller with 8 MB of
video memory
Expansion:
• 3x full-height, full-length
64-bit 133/100MHz PCI-X expansion slots (with Riser Card)
PCI Expansion:
• 1x 64-bit 133/100/66MHz
PCI-X (3.3V) slot
IDE:
• Dual EIDE channels support
up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
USB:
Up to 6x USB 2.0 ports
Seriel Ports:
• 1x External Serial Port
• Internal header supporting 2x Fast UART 16550 serial
ports
BIOS type:
6MB AMI® Flash BIOS (total
of 6x BIOS Chips)
BIOS Features:
• Plug and Play (PnP)
• SMBIOS 2.3
• PCI 2.2
• ACPI 1.0 (limited)
• Hardware BIOS virus protection
Chassis:
Form Factor 2U Rackmount
Model SC823Hi-R500RC
Dimensions:
Height 3.5" (89mm)
Width 16.7" (424mm)
Depth 25.7" (653mm)
LEDs:
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED
Drive Bays:
• 6 x 3.5" IDE Drive Bays
Peripheral Bay(s):
• 1x 5.25" full-height peripheral bay
System Cooling:
• 4x 80mm 6300 RPM fans
Power Supply:
Redundant 2U 500W AC power supply w/ PFC
[ 24-pin, (8-pin, 4-pin)=12V) ] |