| Motherboard |
| AS-1020C-3 |
A+ Server 1020C-3 (Beige) |
| Motherboard |
| |
H8DCR-3 |
| Processor/Chipset |
| CPU |
Dual 940-pin ZIF Sockets
Supports up to two Dual-Core AMD Opteron™ 200
Series processor(s)
Single CPU configurations are not recommended
VRM x3
|
| Chipset |
nVidia nForce Pro 2200 (CK804)
AMD 8132
|
| System Memory |
| Memory Capacity |
Eight 184-pin DIMM sockets
Supports up to 16 GB DDR 400 MHz memory or
Supports up to 32 GB DDR 333 MHz memory or
Supports up to 32 GB DDR 266 MHz memory
Single or Dual (recommended) channel memory support
For Single CPU: Memory must be populated in CPU1
DIMMs only
For Dual CPUs: Recommended that memory be populated
equally in adjacent memory banks
|
| Memory Type |
DDR 400/333/266MHz
buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated
DIMMs |
| DIMM Sizes |
256 MB,
512 MB, 1GB, 2GB, 4GB** |
| Memory Voltage |
2.5 V
only |
| Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
|
| On-Board Devices |
| SAS |
Adaptec AIC-9410W SAS Controller
8 SAS Ports (4 Internal, 4 External)
RAID 0, 1, 10
Zero-Channel RAID: Supermicro All-In-One ZCR
card: AOC-LPZCR2
|
| IPMI |
1U support: Intelligent Platform Management Interface
v.2.0+ ( Optional:
1UIPMI-B )
Remote Management Module
(Card not included)
|
| Network Controllers |
Two Broadcom BCM5721 Gigabit LAN / Ethernet Controllers
Supports 10Base-T, 100Base-TX, and 1000Base-T,
RJ45 output
|
| Graphics |
ATI Rage XL 8MB
|
| Super
I/O |
Winbond
83627HG |
| Clock
Generator |
ICS8634
|
| Expansion Slots |
| Full-height
/ Half-length Slot |
64-bit 133MHz PCI-X (riser card pre-preinstalled)
OR
PCI-E x8 (requires optional riser card CSE-RR1U-EL
)
|
| Low-profile
/ Half-length Slot |
64-bit 100MHz PCI-X (riser card pre-installed) OR
PCI-E x8 (requires optional riser card CSE-RR1U-ELP
)
Note: Dual Processors are required for correct PCI-X
expansion slot operation
|
| Input / Output |
| Serial
Attached SCSI |
Integrated Adaptec AIC-9410W(SAS) Controller
Two Serial Attached SCSI (SAS) ports (1 internal,
1 external)
Each SAS port supports up to 4 SAS / SATA drives
for a total of up to 8 SAS or SATA hard drives
|
| IDE |
Dual EIDE channels support up to four UDMA IDE
devices
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA 100/133
|
| Floppy |
• 1
Floppy port; 1.44 MB |
| LAN |
• 2 RJ45 LAN port
|
| USB |
FUCI
Up to 4 USB Ports 2.0 Compliant
2 Rear Ports
2 Internal Headers
|
| Keyboard / Mouse |
• PS/2 keyboard and mouse ports
|
| Serial Ports |
1 Fast UART 16550 serial port
1 header
|
| VGA |
• 1
VGA port |
| Chassis |
| Form Factor |
• 1U
Rackmount |
| Model |
• SC813TQ+-500 |
| Dimensions |
| Height |
• 1.7" (43mm) |
| Width |
• 17.2" (437mm) |
| Depth |
• 25.6" (650mm) |
| Gross Weight |
• 38 lbs (17.2kg) |
| Available Colors |
• Beige, Black
|
| Front Panel |
| Buttons |
• Power On/Off button
• System Reset button
|
| LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
|
| Drive Bays |
| Hot-swap |
• 4 x 1" hot-swap SCSI Drive Bays with SAF-TE |
| Peripheral Bay(s)
[90 o Rotatable] |
• N/A |
| Peripheral Drives |
| Floppy |
3.5" 1.44MB
Slim Floppy Drive |
| CD-ROM |
Slim 24x CD-ROM drive
|
| SAS Backplane |
|
• 4 x 1" SAS HDD Backplane |
| System Cooling |
| Fans |
4x 10,200
RPM counter rotating fans |
| Power Supply |
|
Cold-swappable
500W AC power supply module with PFC
[ 20-pin, (4-pin, 8-pin = 12V) ] |
| AC Voltage |
100 -
240V, 60-50Hz, 10 Amp Max |
| DC Output |
5V +
3.3V = 160W |
| +5V |
30.0
Amp |
| +5V standby |
2.0 Amp |
| +12V |
39.0
Amp |
| -12V |
1.0 Amp |
| +3.3V |
21.0
Amp |
| PC Health Monitoring |
| CPU |
Monitors CPU Core Voltages, +1.5V, +2.5V, +3.3V,
+5V, ±12V, HyperTransport Link voltage 1.2V,
memory voltage 2.5V, 3.3V Standby, VBAT |
| FAN |
Total up to 5-fan status tachometer monitoring
Up to five 3-pin fan headers
|
| Temperature |
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
I 2 C Temperature Sensing Logic
|
| LED |
CPU / System Overheat LED
Suspend-State Indicator LED
+5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| System BIOS |
| BIOS Type |
8Mb Flash EEPROM with AMI® BIOS
49LF080A BIOS Chip
|
| BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
DMI 2.3
ACPI 2.0 / 1.0
BIOS Rescue Hot Keys
USB Keyboard Support
|
