Motherboard |
AS-1021M-82V |
A+ Server 1021M-82V(Silver) |
Motherboard |
|
• Super
H8DMR-82 |
Processor/Chipset |
CPU |
Quad 1207-pin Socket F
Supports up to two Dual-Core AMD Opteron™ 2000 Series
(Socket F) processor(s)
Single CPU configurations are not recommended
|
System
Bus |
1000MHz HyperTransport
|
Chipset |
nVidia nForce MCP55 Pro
NEC uPD720400
|
System Memory |
Memory Capacity |
Eight 240-pin DIMM sockets
Supports up to 16 GB DDR2 667 MHz memory or
Supports up to 16 GB DDR2 533 MHz memory or
Supports up to 32 GB DDR2 400 MHz memory
Single or Dual (recommended) channel memory support
For Single CPU: Memory must be populated in CPU1
DIMMs only
For Dual CPUs: Recommended that memory be populated
equally in adjacent memory banks
|
Memory Type |
• DDR2 667/533/400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated
DIMMs |
DIMM Sizes |
• 256
MB, 512 MB, 1GB, 2GB, 4GB |
Memory Voltage |
• 1.8 V only |
Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
|
On-Board Devices |
SCSI |
Adaptec AIC-7902W Controller
Dual-Channel Ultra320 SCSI with Host RAID
Host RAID 0, 1, 10, JBOD
|
Zero Channel
RAID |
Support for Zero-Channel RAID with Supermicro
All-In-One-ZCR Card :AOC-LPZCR1 or AOC-LPZCR2 (or)
(Card not included)
|
IPMI |
1U support: Intelligent Platform Management Interface
v.2.0+ ( Optional:
AOC-SIM1U-3B )
For Dedicated 3rd DATA LAN, use both AOC-SIM1U-3B
+ AOC-SIM1U-3D
Remote Management Module
(Add-on Cards not included)
|
Network Controllers |
nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet
Controller
Supports 10Base-T, 100Base-TX, and 1000Base-T,
RJ45 output
|
Super
I/O |
• Winbond 83627HF |
VGA |
• ATI ES1000 Graphics Controller |
Expansion Slots |
Left
Universal Slot |
1 PCI-express x8 Slot OR
1 64-bit 133MHz PCI-X slot
|
Right
Universal Slot |
1 PCI-express x8 Slot OR
1 64-bit 133MHz PCI-X slot
|
Input / Output |
IDE |
Single EIDE channel support up to two UDMA IDE devices
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA 100/133
|
Floppy |
• 1
Floppy port; 1.44 MB |
LAN |
• 2 RJ45 LAN port
|
USB |
FUCI
Up to 4 USB Ports 2.0 Compliant
2 Rear Ports
2 Internal Headers
|
Keyboard / Mouse |
• PS/2 keyboard and mouse ports
|
Serial Ports |
1 Fast UART 16550 serial port
1 header
|
VGA |
• 1
VGA port |
Chassis |
Form Factor |
• 1U
Rackmount |
Model |
• SC815S+-560 |
Dimensions |
Height |
• 1.7" (43mm) |
Width |
• 17" (432mm) |
Depth |
• 25.6" (650mm) |
Gross Weight |
• 42 lbs (19.0kg) |
Available Colors |
• Silver,
Black
|
Front Panel |
Buttons |
• Power On/Off button
• System Reset button
|
LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
|
Drive Bays |
Hot-swap |
4x 1" Hot-swap
U320 SCSI drive bays |
Peripheral Drives |
DVD-ROM |
Slim
8x DVD, 24x CD, DVD-ROM drive |
SCSI Backplane |
|
1U SCSI
Backplane w/ SAF-TE |
System Cooling |
Fans |
4x Cooling
Fans |
Shroud |
1x Air
Shroud |
Power Supply |
|
• 560W AC power supply w/ PFC
(20-pin) |
AC Voltage |
• 100 - 240V, 50 - 60Hz, 8.5 - 4Amp |
DC Output |
•N/A |
+5V |
• 25Amp |
+5V standby |
• 3
amp
|
+12V |
• 43.6
Amp |
-12V |
• 0.6 amp
|
+3.3V |
• 21Amp |
PC Health Monitoring |
CPU |
Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V
Standby, VBAT
CPU 4-Phase-switching voltage reulator |
FAN |
Total up to 5-fan status tachometer monitoring
Up to five 3-pin fan headers
Status monitor for speed control
Stauts monitor for on/off control
Support 3-pin fans with fan-speed control
Low noise fan speed control
Overheat backup fan connector |
Temperature |
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
PC Temperature Sensing Logic |
LED |
CPU / System Overheat LED
Suspend-State Indicator LED
+5V Standby Alert LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
System BIOS |
BIOS Type |
8Mb Flash EEPROM with AMI® BIOS
SST 49LF080A BIOS Chip |
BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• ACPI 1.0
• Fan Speed Control
|