| Motherboard |
| AS-1021M-T2+V |
A+ Server 1021M-T2+V(Silver) |
| Motherboard |
| |
• Super
H8DME-2 |
| Processor/Chipset |
| CPU |
Quad 1207-pin Socket F
Supports up to two Dual-Core AMD Opteron™ 2000 Series
(Socket F) processor(s)
Single CPU configurations are not recommended
|
| System
Bus |
1000MHz HyperTransport
|
| Chipset |
nVidia nForce MCP55 Pro
NEC uPD720400
|
| System Memory |
| Memory Capacity |
Eight 240-pin DIMM sockets
Supports up to 16 GB DDR2 667 MHz memory or
Supports up to 16 GB DDR2 533 MHz memory or
Supports up to 32 GB DDR2 400 MHz memory
Single or Dual (recommended) channel memory support
For Single CPU: Memory must be populated in CPU1
DIMMs only
For Dual CPUs: Recommended that memory be populated
equally in adjacent memory banks
|
| Memory Type |
• DDR2 667/533/400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated
DIMMs |
| DIMM Sizes |
• 256
MB, 512 MB, 1GB, 2GB, 4GB |
| Memory Voltage |
• 1.8 V only |
| Error Detection |
• N/A |
| On-Board Devices |
| SATA |
nVidia MCP55 Pro SATA2 3.0Gbps Controller
6 SATA Ports
nVidia RAID 2.0
SATA RAID 0, 1, 0+1, 5, JBOD Support
|
| IPMI |
Intelligent Platform Management Interface
v.2.0, Low Profile ( Optional:
AOC-SIMLC )
RMM (Remote Management Module)
(Card not included)
|
| Network Controllers |
nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet
Controller
Supports 10Base-T, 100Base-TX, and 1000Base-T,
RJ45 output
|
| Super
I/O |
• Winbond 83627HF |
| VGA |
• ATI ES1000 Graphics Controller |
| Expansion Slots |
| PCI-Express |
1 PCI-express x8 Slot |
| Input / Output |
| SATA |
6 SATA2 ports |
| IDE |
Single EIDE channel support up to two UDMA IDE devices
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA 100/133
|
| Floppy |
• 1
Floppy port; 1.44 MB |
| LAN |
• 2 RJ45 LAN port
|
| USB |
FUCI
Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
2 Rear Ports
4 Internal Headers
|
| Keyboard / Mouse |
• PS/2 keyboard and mouse ports
|
| Serial Ports |
1 Fast UART 16550 serial port
1 header
|
| VGA |
• 1
VGA port |
| Chassis |
| Form Factor |
• 1U
Rackmount |
| Model |
• SC815TQ-560CV |
| Dimensions |
| Height |
• 1.7" (43mm) |
| Width |
• 17.2" (437mm) |
| Depth |
• 25.6" (650mm) |
| Gross Weight |
38 lbs (17.2kg)
|
| Available Colors |
• Silver,
Black
|
| Front Panel |
| Buttons |
• Power On/Off button
• System Reset button
|
| LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
|
| Ports |
2x USB & DB9 COM port tray
(Optional - in place of floppy drive)
|
| Drive Bays |
| Hot-swap |
4x 1" Hot-swap SATA drive bays
|
| Peripheral Drives |
| DVD-ROM |
Slim
8x DVD, 24x CD, DVD-ROM drive |
| SATA Backplane |
|
1U SATA
/ SAS Backplane w/ AMI 9071 chip |
| System Cooling |
| Fans |
4x Cooling
Fans |
| Shroud |
1x Air
Shroud |
| Power Supply |
|
• 560W AC power supply w/ PFC
(20-pin) |
| AC Voltage |
• 100 - 240V, 50 - 60Hz, 8.5 - 4Amp |
| DC Output |
•N/A |
| +5V |
• 25Amp |
| +5V standby |
• 3
amp
|
| +12V |
• 43.6
Amp |
| -12V |
• 0.6 amp
|
| +3.3V |
• 21Amp |
| PC Health Monitoring |
| CPU |
Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V
Standby, VBAT
CPU 4-Phase-switching voltage reulator |
| FAN |
Total up to 5-fan status tachometer monitoring
Up to five 3-pin fan headers
Status monitor for speed control
Stauts monitor for on/off control
Support 3-pin fans with fan-speed control
Low noise fan speed control
Overheat backup fan connector |
| Temperature |
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
PC Temperature Sensing Logic |
| LED |
CPU / System Overheat LED
Suspend-State Indicator LED
+5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| System BIOS |
| BIOS Type |
8Mb Flash EEPROM with AMI® BIOS |
| BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• ACPI 1.0
• Fan Speed Control
|
