| Product SKUs |
| AS-1010S-MRB |
• A+ Server 1010S-MR (Black) |
| Motherboard |
| |
• Super H8SSL-i |
| Processor/Chipset |
| CPU |
• Single 939-pin ZIF Sockets
• Supports one Dual-Core AMD Opteron™ 100 Series
processor
• 1MB Cache
• 4 phase VRM |
| Chipset |
• HyperTransport Link
• ServerWorks HT1000 I/O Hub |
| System Memory |
| Memory Capacity |
• Four 184-pin DIMM sockets
• Supports up to 8 GB DDR 400/333 MHz memory or
• Single or Dual (recommended) channel memory |
| Memory Type |
• DDR 400/333MHz unbuffered ECC SDRAM 72-bit, 184-pin
gold-plated DIMMs |
| DIMM Sizes |
• 256 MB, 512 MB, 1GB, 2GB |
| Memory Voltage |
• 2.5 V only |
| Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| SATA |
• 4 SATA Ports using ServerWorks HT1000 controller |
| IDE |
• Supports UDMA Mode 5
• Supports PIO Mode 4
• Supports ATA/100 |
| IPMI |
• Intelligent Platform Management Interface v.2.0+
( Optional:
1UIPMI-B )
• (Card not included) |
| Network Controllers |
• Broadcom BCM5704C Dual Gigabit Ethernet Controller
• Supports 1000BASE-T, RJ45 output |
| VGA |
• ATI Rage XL 8MB PCI Graphics Controller
• VGA Port |
| Super I/O |
• NS PC87427 |
| Clock Generator |
• ICS932S801AG |
| Expansion Slots |
| PCI-X |
• 1 64-bit 133MHz PCI-X (3.3V) slot |
| Input / Output |
| SATA |
• Up to two SATA devices |
| IDE |
• Single ATA 100 EIDE channels support up to two
UDMA IDE devices
• Supports UDMA Mode 5
• Supports ATA/100 |
| Floppy |
• 1 Floppy port; 1.44 MB |
| LAN |
• 2 RJ45 LAN ports |
| USB |
• 2 USB Rear Ports
• 2 USB Internal Headers
• USB 2.0 Compliant, 1.1 Compatible |
| Keyboard / Mouse |
• PS/2 keyboard and mouse ports |
| Serial Ports |
• 2 Fast UART 16550 serial ports
• 1 Header |
| System BIOS |
| BIOS Type |
• 4Mb Flash EEPROM with AMI® BIOS
• SST-49LF004B BIOS Chip |
| BIOS Features |
• Plug and Play (PnP)
• ACPI 1.0
• PCI 2.2
• DMI 2.3
• BIOS Rescue Hot Keys
• SMBIOS 2.3
• USB Legacy support
• Hardware BIOS Virus Protection
• RTC (Real Time Clock) Wakeup |
| Chassis |
| Form Factor |
• 1U Rackmount |
| Model |
• SC512C-260
|
| Dimensions |
| Height |
• 1.7" (43mm) |
| Width |
• 16.8" (426mm) |
| Depth |
• 14" (358mm) |
| Gross Weight |
• 17 lbs (7.7kg) |
| Available Colors |
• Beige, Black |
| Front Panel |
| Buttons |
• Power On/Off button
• System Reset button |
| LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Failure LED |
| Ports |
• 2x USB Ports (USB 2.0 Ready) |
| Peripheral Drives |
| Floppy |
• 3.5" 1.44MB Slim Floppy Drive |
| CD-ROM |
• Slim 24x CD-ROM drive |
| System Cooling |
| Fans |
• 1x 5K RPM 10cm Blower Fan |
| Air Shroud |
• 1x Air duct |
| Power Supply |
|
• Thermal
control 260W AC power supply with PFC
[ 24-pin, 4-pin=12V, (2) 4-pin ] |
| AC Voltage |
• 100 - 240V, 60-50Hz, 5-3 Amp |
| DC Output |
• 5V + 3.3V = 140W |
| +5V |
• 25.0 Amp |
| +5V standby |
• 2.0 Amp |
| +12V |
• 21.0 Amp |
| -12V |
• 1.0 Amp |
| +3.3V |
• 15.0 Amp |
| Regulatory (Power Supply) |
| Safety / EMC |
• USA - UL Listed, FCC
• Canada - CUL listed
• Germany - TUV Certified
• Europe/CE Mark
• EN 60950/IEC 60950-Compliant |
| PC Health Monitoring |
| CPU |
• Monitors CPU Core Voltages, +5V, ±12V, 2.5V
Standby, 5V Standby, VBAT
• Monitor for HyperTransport voltage 1.2V, DDR termination
1.25V
• CPU 4-phase Switching Voltage Regulator
• Supports System Management Utility |
| FAN |
• Total up to five 3-pin fan headers
• 5 Fan Status Tachometer monitoring
• Status Monitor for Speed Control |
| Temperature |
• Monitoring for CPU and chassis environment
• CPU Thermal Trip support
• I 2 C temperature sensing logic |
| LED |
• CPU / Overheat LED
• Suspend-state indicator LED |
| Other Features |
• Chassis Intrusion Header |
