Motherboard |
|
• H8DSR-8 |
Processor/Chipset |
CPU |
• Dual 940-pin ZIF Sockets
• Supports up to two Dual-Core AMD Opteron™ 200 Series
processor(s)
• 1MB Cache
• VRM x3 |
Chipset |
• ServerWorks HT2000
• ServerWorks HT1000 |
System Memory |
Memory Capacity |
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR 400 MHz memory or
• Supports up to 32 GB DDR 333 MHz memory or
• Supports up to 32 GB DDR 266 MHz memory
• Single or Dual (recommended) channel memory support
• For Single CPU: Memory must be populated in the
adjacent memory bank
• For Dual CPUs: Recommended that memory be populated
equally in adjacent memory banks |
Memory Type |
• DDR 400/333/266MHz buffered (registered) ECC SDRAM
72-bit, 184-pin gold-plated DIMMs |
DIMM Sizes |
• 256 MB, 512 MB, 1GB, 2GB, 4GB** |
Memory Voltage |
• 2.5 V only |
Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory) |
On-Board Devices |
IDE |
• Supports UDMA Mode 5
• Supports PIO Mode 4
• Supports ATA/100 |
SCSI |
• Adaptec AIC-7902W Controller
• Dual-Channel Ultra320 SCSI with Host RAID
• Host RAID 0, 1, 10, JBOD |
Zero Channel RAID |
• Support for Zero-Channel RAID with
• Low Profile, Supermicro All-In-One ZCR Card ( AOC-LPZCR1 )
• (Card not included) |
IPMI |
• Intelligent Platform Management Interface v.2.0+
• ( Optional:
1UIPMI-B ) 1U Support
• ( Optional:
1UIPMI-B + 1UIPMI-LANG )
for 3rd LAN port support with IPMI
• RMM (Remote Management Module)
• (Card not included) |
Network Controllers |
• ServerWorks® HT2000 Dual Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output |
VGA |
• ATI Rage XL 8MB PCI Graphics Controller
• VGA Port |
Super I/O |
• NS PC87427 |
Clock Generator |
• ICS932S801AG |
Expansion Slots |
PCI-Express |
• 2 PCI-e x8 slots (Optional with PCI-e Riser Card) |
PCI-X |
• 1
64-bit 133MHz PCI-X (3.3V) slot (Low-Profile)
• 1 64-bit 100MHz PCI-X (3.3V) slot
(Full-height / Full-length) |
IPMI |
• IPMI 2.0 expansion slot |
Input / Output |
SCSI |
• 2-Channel Ultra320 SCSI
• AIC7902 SCSI Controller
• SCSI ZCR Support |
Floppy |
• 1 Floppy port; 1.44 MB |
LAN |
• 2 RJ45 LAN port |
USB |
• FUCI
• 2 USB Rear Ports
• 2 USB Internal Headers
• USB 2.0 Compliant, 1.1 Compatible |
Keyboard / Mouse |
• PS/2 keyboard and mouse ports |
Serial Ports |
• 1 Fast UART 16550 serial ports
• 1 Header |
Chassis |
Form Factor |
• 1U Rackmount |
Model |
• SC813S+-500
|
Dimensions |
Height |
• 1.7" (43mm) |
Width |
• 17.2" (437mm) |
Depth |
• 25.6" (650mm) |
Gross Weight |
• 36 lbs (16.4kg) |
Available Colors |
• Beige, Black |
Front Panel |
Buttons |
• Power On/Off button
• System Reset button |
LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED |
Ports |
• N/A |
Drive Bays |
Hotswap |
• 4 x 1" hot-swap SCSI Drive Bays with SAF-TE |
Peripheral Drives |
Floppy |
• 3.5" 1.44MB Slim Floppy Drive |
CD-ROM |
• Slim 24x CD-ROM drive |
SCSI Backplane |
|
• 4 x 1" SCSI HDD Backplane |
System Cooling |
Fans |
• 4x 10,200 RPM counter rotating fans |
Power Supply |
|
• Cold-swappable 500W AC power supply module with PFC
[ 20-pin, (4-pin, 8-pin = 12V) ] |
AC Voltage |
• 100 - 240V, 60-50Hz, 10 Amp Max |
DC Output |
• 5V + 3.3V = 160W |
+5V |
• 30.0 Amp |
+5V standby |
• 2.0 Amp |
+12V |
• 39.0 Amp |
-12V |
• 1.0 Amp |
+3.3V |
• 21.0 Amp |
System BIOS |
BIOS Type |
• 8Mb Flash EEPROM with AMI® BIOS
• SST49LF080A BIOS Chip |
BIOS Features |
• Plug and Play (PnP)
• ACPI 2.0
• PCI 2.2
• DMI 2.3
• BIOS Rescue Hot Keys
• SMBIOS 2.3
• USB Keyboard support |
PC Health Monitoring |
CPU |
• Monitors CPU Core Voltages, +5V, ±12V & +2.5V,
2.5V Standby, +5V Standby, VBAT.
• Monitor for HyperTransport voltage 1.2V, memory
voltage 2.5V, DDR termination 1.25V
• Up to 5 fan status
• Supports System Management Utility |
FAN |
• Total of up to five 3-pin fan headers
• 5 Tachometer monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low-noise Fan Speed Control
• Overheat backup fan connector |
Temperature |
• Monitoring for CPU and chassis environment
• CPU Thermal Trip support
• PC temperature sensing logic |
LED |
• CPU / Overheat LED
• Suspend-state indicator LED
• +5V Standby alert LED |
Other Features |
• Chassis Intrusion Detection
• Chassis Intrusion Header |