Motherboard |
|
• H8DAR-8 |
Processor/Chipset |
CPU |
• Dual 940-pin ZIF Sockets
• Supports up to two Dual-Core AMD Opteron™ 200 Series
processor(s)
• VRM x3 |
Chipset |
• HyperTransport Link
• AMD 8131 HyperTransport PCI-X Tunnel
• AMD 8111 HyperTransport I/O Hub |
System Memory |
Memory Capacity |
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR 400 MHz memory or
• Supports up to 16 GB DDR 333 MHz memory or
• Supports up to 32 GB DDR 266 MHz memory
• Single or Dual(recommended) channel memory
• For Single CPU: Memory must be populated in the
adjacent memory bank
• For Dual CPUs: Recommended that memory be populated
equally in adjacent memory banks |
Memory Type |
• DDR 400/333/266MHz buffered (registered) ECC SDRAM
72-bit, 184-pin gold-plated DIMMs |
DIMM Sizes |
• 256 MB, 512 MB, 1GB, 2GB, 4GB** |
Memory Voltage |
• 2.5 V only |
Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory) |
On-Board Devices |
SCSI |
• Adaptec AIC-7902W Controller
• Dual-Channel Ultra320 SCSI with Host RAID
• Host RAID 0, 1, 10 |
Zero Channel RAID |
• Support for Zero-Channel RAID with AOC-SOZCR1 ZCR
Card or (SO-DIMM ZCR socket)
• (Card not included) |
IPMI |
• Intelligent Platform Management Interface v.2.0+
• ( Optional:
1UIPMI-B ) 1U Support
• ( Optional:
1UIPMI-B + 1UIPMI-LANG )
for 3rd LAN port support with IPMI
• RMM (Remote Management Module)
• (Card not included) |
Network Controllers |
• Broadcom® 5704 Dual Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output |
VGA |
• ATI Rage XL 8MB PCI Graphics Controller |
Expansion Slots |
PCI-X |
• 1 64-bit 100MHz PCI-X full-height, full-length
slot |
Input / Output |
IDE |
• Dual ATA 133/100 EIDE channels support up to four
UDMA IDE devices |
Floppy |
• 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support |
LAN |
• 2 RJ45 LAN port |
USB |
• FUCI
• Up to 5 USB Ports 1.1 Compliant |
Keyboard / Mouse |
• PS/2 keyboard and mouse ports |
Serial Ports |
• 2 Fast UART 16550 serial ports |
Chassis |
Form Factor |
• 1U Rackmount |
Model |
• SC812S-420C
|
Dimensions |
Height |
• 1.7" (43mm) |
Width |
• 16.8" (426mm) |
Depth |
• 25.6" (650mm) |
Gross Weight |
• 34 lbs (15.4kg) |
Available Colors |
• Beige, Black |
Front Panel |
Buttons |
• Power On/Off button
• System Reset button
• NMI button |
LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED |
Ports |
• 2x USB Ports
• 1x RJ45 COM Port |
Drive Bays |
Hotswap |
• 3 x 1" hot-swap Ultra320/160 SCSI Drive Bays with
SAF-TE |
Peripheral Drives |
Floppy |
• Sony3.5" 1.44MB Slim Floppy Drive |
CD-ROM |
• TEAC Slim 24x CD-ROM drive |
SCSI Backplane |
|
• 1x SCA812S 1U SCSI Backplane w/ SAF-TE |
System Cooling |
Fans |
• 2x 10cm blower fans |
Power Supply |
|
• Fixed 420W AC power supply with PFC |
AC Voltage |
• 100 - 240V, 60-50Hz, 7 Amp Max |
DC Output |
• 5V + 3.3V = 160W |
+5V |
• 30.0 Amp |
+5V standby |
• 2.0 Amp |
+12V 1 |
• 15.0 Amp |
+12V 2 |
• 15.0 Amp |
+12V 3 |
• 18.0 Amp |
+12V all |
• 32.0 Amp Max |
-12V |
• 1.0 Amp |
+3.3V |
• 20.0 Amp |
System BIOS |
BIOS Type |
• 4Mb Flash EEPROM with AMI® BIOS |
BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• ACPI 1.0
• Fan Speed Control |
PC Health Monitoring |
CPU |
• Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V
Standby, HyperTransport voltage 1.2V, memory voltage
2.5V, DDR termination 1.25V, chipset voltage 1.8V
• Up to 5 fan status
• Supports System Management Utility |
FAN |
• Total up to 5-fan status
• 3-pin fan speed control |
Temperature |
• Monitoring for CPU, chassis, environment |
LED |
• Overheat LED |
Other Features |
• Chassis Intrusion Header |