Motherboard |
|
• H8DAR-T
|
Processor/Chipset |
CPU |
• Dual 940-pin ZIF Sockets
• Supports up to two Dual-Core AMD Opteron™ 200 Series
processor(s)
• VRM x4
|
Chipset |
• HyperTransport Link
• AMD 8132 HyperTransport PCI-X Tunnel
• AMD 8111 HyperTransport I/O Hub
|
System Memory |
Memory Capacity |
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR 400 MHz memory or
• Supports up to 16 GB DDR 333 MHz memory or
• Supports up to 32 GB DDR 266 MHz memory
• Single or Dual(recommended) channel memory
• For Single CPU: Memory must be populated in the
adjacent memory bank
• For Dual CPUs: Recommended that memory be populated
equally in adjacent memory banks
|
Memory Type |
• DDR 400/333/266MHz buffered (registered) ECC SDRAM
72-bit, 184-pin gold-plated DIMMs
|
DIMM Sizes |
• 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
Memory Voltage |
• 2.5 V only
|
Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
|
On-Board Devices |
SATA |
• Marvell 88SX6041 Controller
• 4-Port SATA
• Host RAID 0, 1, JBOD
|
Zero Channel RAID |
• Support for Zero-Channel RAID with
• Low Profile, Supermicro All-In-One ZCR Card ( AOC-LPZCR1 )
• (Card not included)
|
IPMI |
• Intelligent Platform Management Interface v.2.0+
• ( Optional:
1UIPMI-B ) 1U Support
• ( Optional:
1UIPMI-B + 1UIPMI-LANG )
for 3rd LAN port support with IPMI
• RMM (Remote Management Module)
• (Card not included)
|
Network Controllers |
• Broadcom® 5704 Dual Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output
|
VGA |
• ATI Rage XL 8MB PCI Graphics Controller
|
Expansion Slots |
PCI-X |
• 2x 64-bit 133/100MHz PCI-X (3.3V) slots
• (One slot for Full-height / Half-length cards,
one slot for Low-profile / Half-length cards)
|
Input / Output |
Serial ATA |
• Four Serial ATA connectors
• Four SATA hard drives supported
|
IDE |
• Dual ATA 133/100 EIDE channels support up to four
UDMA IDE devices
|
Floppy |
• 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
|
LAN |
• 2 RJ45 LAN port
|
USB |
• FUCI
• Up to 5 USB Ports 1.1 Compliant
|
Keyboard / Mouse |
• PS/2 keyboard and mouse ports
|
Serial Ports |
• 2 Fast UART 16550 serial ports
|
System BIOS |
BIOS Type |
• 4Mb Flash EEPROM with AMI® BIOS
|
BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• ACPI 1.0
• Fan Speed Control
|
Chassis |
Form Factor |
• 1U Rackmount
|
Model |
• SC813T+-500
|
Dimensions |
Height |
• 1.7" (43mm)
|
Width |
• 17.2" (437mm)
|
Depth |
• 25.6" (650mm)
|
Gross Weight |
• 36 lbs (16.4kg)
|
Available Colors |
• Beige, Black
|
Front Panel |
Buttons |
• Power On/Off button
• System Reset button
|
LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
|
Ports |
• N/A
|
Drive Bays |
Hotswap |
• 4 x 1" hot-swap SATA Drive Bays with SAF-TE
|
Peripheral Drives |
Floppy |
• TEAC 3.5" 1.44MB Slim Floppy Drive
|
CD-ROM |
• TEAC Slim 24x CD-ROM drive
|
Backplane |
|
• 4 x 1" SATA HDD Backplane
|
System Cooling |
Fans |
• 4x 9cm 10,200 RPM cooling fans
|
Power Supply |
|
• Cold-swappable 500W AC power supply module with PFC
|
AC Voltage |
• 100 - 240V, 60-50Hz, 10 Amp Max
|
DC Output |
• 5V + 3.3V = 160W
|
+5V |
• 30.0 Amp
|
+5V standby |
• 2.0 Amp
|
+12V all |
• 39.0 Amp Max
|
-12V |
• 1.0 Amp
|
+3.3V |
• 21.0 Amp
|
Management |
Software |
• Optional IPMI (Intelligent Platform Management
Interface) 2.0
• Super
Doctor III
• Watch Dog
|
Power Configurations |
• ACPI/API Power Management
• Wake-On-LAN (WOL) header
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on
|
PC Health Monitoring |
CPU |
• Monitors CPU Core Voltages, +3.3V, +5V, ±12V & battery
voltage
• Up to 5 fan status
• Supports System Management Utility
|
FAN |
• Total up to 5-fan status
• 3-pin fan speed control
|
Temperature |
• Monitoring for CPU, chassis, environment
|
LED |
• Overheat LED
|
Other Features |
• Chassis Intrusion Header
|