| Product SKUs |
| MBD-X8STi-F -O | X8STi-F (Standard Retail Pack) |
| MBD-X8STi-F -B | X8STi-F (Bulk Pack) |
| Physical Stats |
| Form Factor | • ATX |
| Dimensions | 12" x 9.6" (30.5cm x 24.4cm) |
| Processor/Cache |
| CPU | LGA 1366 Socket Intel® Core™ i7-965 processor Extreme Edition (3.2 GHz) Intel® Core™ i7-940 processor (2.93 GHz) Intel® Core™ i7-920 processor (2.66 GHz) Supports future Intel® Nehalem processor families |
| System Bus | QPI (up to 6.4 GT/s) |
| System Memory |
| Memory Capacity | Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory Three Channel memory bus 6 DIMM sockets |
| Memory Type | • 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | • 256MB, 512MB, 1GB, 2GB, 4GB |
| Memory Voltage | • 1.5 V |
| On-Board Devices |
| Chipset | Intel® X58 Express chipset ICH10R |
| Serial ATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC |
| Network Controllers | 2x Intel® 82574L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| VGA | Matrox G200eW 8 MB DDR2 |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | CK505 |
| Input / Output |
| - | - |
| Serial ATA | 6 SATA ports 6 SATA hard drives supported |
| Floppy | • 1 Floppy controller; 1.44 MB |
| LAN | • 2x RJ45 LAN ports |
| USB | 2x USB rear ports 2x USB on-board 2x USB internal headers (4 ports) Total 8 USB 2.0 Compliant |
| VGA | • 1x VGA Port |
| Keyboard / Mouse | • PS/2 keyboard and mouse ports |
| Serial Ports | 1x Fast UART 16550 serial port 1x internal header |
| Parallel Port | - |
| Chassis ( Optimized for X8STi-F ) |
| 1U | CSE-811TQ-280
CSE-813MTQ-280C
CSE-113MTQ-360
CSE-111TQ-360 |
| Important Note | To ensure system stability, a 550W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
| Expansion Slots |
| PCI-X | 1 (x16) PCI-e 2.0 slot 1 (x8) PCI-e slot |
| PCI | 1 x 32-bit PCI slot |
| System BIOS |
| BIOS Type | 4Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
| Management |
| Software | Watch Dog NMI Super Doctor III Optional IPMI 1.5/2.0 |
| Power Configurations | ACPI / ACPM Power Management Main Switch Override Mechanism Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode for AC power recovery Internal/External modem ring-on |
| PC Health Monitoring |
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of six fan headers supporting up to 6 fans Six 4-pin fan headers 6x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED +5V Standby alert LED |
| Other Features | • Chassis Intrusion Detection
• Chassis Intrusion Header |
