|
|
Supermicro X10SL7-F microATX Intel XEON 4th Gen Intel C222 G34 Motherboard DDR3, 2x GBLAN, 1x PCI-E X8, 1x PCI-E X4, SAS2, SATA 6G, IPMI, DOM, RAID, VGA, USB 3.0 : MBD-X10SL7-F-O
|
|
Images shown for reference only
|
|
|
Supermicro X10SL7-F microATX Intel XEON 4th Gen Intel C222 G34 Motherboard DDR3, 2x GBLAN, 1x PCI-E X8, 1x PCI-E X4, SAS2, SATA 6G, IPMI, DOM, RAID, VGA, USB 3.0 : MBD-X10SL7-F-O MBD-X10SL7-F-O
|
|
|
|
| Shipping Extra
|
|
| ATACOM Part #: MB16_SUPE_X1_12
|
|
Price: $303.95
|
|
|
|
|
 | Product SKUs | | MBD-X10SL7-F | X10SL7-F (Bulk Pack) | | Physical Stats | | Form Factor | - | | Dimensions | 9.6" x 9.6", (24.4cm x 24.4 cm) | | Processor/Cache | | CPU | Intel® Xeon® processor E3-1200 v3 and 4th Gen Core i3, Pentium, Celeron processors
Single Socket H3 (LGA 1150) | | System Bus | - | | System Memory | | Memory Capacity | 4x 240-pin DDR3 DIMM sockets
Supports up to 32GB DDR3 ECC/Non-ECC Un-Buffered memory (UDIMM) | | Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs | | DIMM Sizes | 8GB, 4GB, 2GB, 1GB | | Memory Voltage | 1.5 V, 1.35 V | | On-Board Devices | | Chipset | Intel® C222 Express PCH | | Serial ATA | SATA3 (6Gbps) w/ RAID 0, 1
SATA2 (3Gbps) w/ RAID 0, 1, 5, 10 | | SAS | SAS2 (6Gbps) via LSI 2308
SW RAID 0, 1, 1E, 10 support | | IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed AST2400 with 10/100/1000M bps MAC | | Network Controllers VGA | Intel® i210AT dual port GbE Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) BMC integrated Aspeed AST2400 | | Input / Output | | SATA SAS | 6x SATA3 (6Gbps) ports via PCH
2x SATA3 (6Gbps) ports via ASM1061®
Total of 8x SATA3 ports (6Gbps) 8x SAS2 (6Gbps) ports | | LAN | 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port | | VGA | 1x VGA D-Sub Connector | | USB | 2x USB 3.0 ports (1 via header, 1 Type-A)
6x USB 2.0 ports (4 rear, 2 via header) | | Audio | 7.1 HD Jacks | | Serial Port / Header DOM | 2x COM ports (1 rear, 1 header) SATA DOM (Disk on Module) power connector support | | TPM | 1x TPM 1.2 20-pin Header | | Chassis ( Optimized for X10SL7-F ) | | Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. | | Expansion Slots | PCI-Express
1x PCI-E 3.0 x8 (in x16) slot
1x PCI-E 2.0 x4 (in x8) slot | | System BIOS | | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | | BIOS Features | DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support | | 1. Single socket H3 (LGA 1150) supports
Intel® Xeon® E3-1200 v3, 4th gen.
Core i3, Pentium, Celeron processors
2. Intel® C222 Express PCH
3. Up to 32GB DDR3 ECC 1600MHz
UDIMMs in 4 sockets
4. Dual Gigabit Ethernet LAN ports via
Intel® i210AT
5. 2x SATA (6Gbps), 4x SATA (3Gbps)
6. 8x SAS2 (6Gbps) via LSI 2308
7. Expansion slots: 1x PCI-E 3.0 x8
(in x16), 1x PCI-E 2.0 x4 (in x8)
8. 2x USB 3.0 (1 Type-A + 1 via header)
6x USB 2.0 (4 rear + 2 via header)
9. Integrated IPMI 2.0 with KVM and
Dedicated LAN
10. SATA DOM power connector support
11. VGA D-sub connector, TPM header |
|
