| Product SKUs |
| MBD-C2SBC-Q -O |
C2SBC-Q (Standard Retail Pack) |
| Physical Stats |
| Form Factor |
ATX |
| Dimensions |
12" x 9.6 ", (30.5cm x 24.4cm) |
| Processor/Cache |
| CPU |
Single LGA775 Socket
Supports an Intel® Core™2 Extreme QX9000/QX6000 series processor
Supports an Intel® Core™2 Quad Q9000/Q6000 series processor
Supports an Intel® Core™2 Duo E8000/E6000 series processor
Supports an Intel® Pentium® dual-core E2000 series processor
Supports an Intel® Celeron® dual-core E1000 series processor
Supports an Intel® Celeron® 400 series processor
|
| System Bus |
1333 / 1066 / 800 MHz system bus |
| System Memory |
| Memory Capacity |
Four 240-pin DIMM sockets
Supports up to 8 GB of unbuffered, non-ECC DDR2 800/667MHz memory (Dual Channel)
|
| Memory Type |
DDR2 800/667MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes |
256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage |
1.8 V only |
| On-Board Devices |
| Chipset |
Intel® Q35
ICH9DO
|
| Serial ATA |
Intel® ICH9DO SATA2 (3 Gbps) controller built-in
RAID 0, 1, 5, 10 support (Windows Only)
RAID 0, 1, 10 support (Linux)
|
| Audio |
Realtek ALC883 High Definition 5.1 Channel Audio |
| Network Controllers |
1 x Intel® 82566DM & Intel® 82573L Dual Port Gigabit PCI-Express Ethernet
Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
|
| VGA |
On board graphics |
| Super I/O |
2x Winbond 83627DHG chips |
| Clock Generator |
CK505 |
| Input / Output |
| Serial ATA |
Six Serial ATA ports ( 3Gbps performance)
Six SATA hard drives supported
|
| IDE |
One EIDE channel supports up to two UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| LAN |
2x RJ45 LAN port |
| USB |
12x USB 2.0 / 1.1 compatible (6x rear ports + 2x on-board + 2x headers) |
| VGA |
On board VGA port |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| Serial Ports |
1x Fast UART 16550 serial port
3x Serial Header
|
| Parallel Port |
1x Parallel Port Header |
| Chassis ( Optimized for C2SBC-Q ) |
| Important Note |
To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required. |
| Expansion Slots |
| PCI-X |
1 (x16) PCI-e slot
1 (x4)(using x8) PCI-e slot
|
| PCI |
5x 32-bit 33MHz PCI (5V) slots |
| System BIOS |
| BIOS Type |
16Mb SPI Flash EEPROM with Phoenix BIOS® |
| BIOS Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
|
| Management |
| Software |
• Super Doctor
III
• Watch Dog
• NMI |
| Power Configurations |
ACPI/APM Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power recovery
Internal / External modem remote ring-on
Suspend to RAM (STR)
|
| PC Health Monitoring |
| CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset
CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio
|
| FAN |
Total of three 4-pin fan headers
3 x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on / off control
Support 3-pin PWM fans (without speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan conn.
|
| Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) Support
PECI
|
| LED |
CPU / System Overheat LED
+5V standby alert LED
|
| Other Features |
Chassis intrusion Detection
Chassis intrusion Header
|
| RoHS |
• RoHS Compliant 6/6 |
