|
|
Supermicro AS-1124US-TNRP, 1U Rackmount Server, Dual AMD EPYC 7002 Series CPU, DDR4 3200MHZ Up to 8TB, Dual 10GB RJ45, Dual 10GB SFP+, 12X 2.5 Inch NVMe Bays, 1200W RPS
|
|
Images shown for reference only
|
|
|
|
|
|
|
| Shipping Extra
|
|
ATACOM Part #:SYA1_SUPE_I6_13
Manufacturer Part #:AS-1124US-TNRP |
|
Price: $2959.95
|
|
|
|
|
|
|
 |
 |
| AS -1124US-TNRP |
- A+ Server 1124US-TNRP (Black)
|
| |
|
| CPU |
- Dual AMD EPYC™ 7002 Series Processors
- Socket SP3
- Supports CPU TDP up to 280W*
|
| Cores |
|
| Note |
* Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
|
| |
|
| Memory Capacity |
- 32 DIMM slots
- Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM
- 8-channel memory bus
|
| Memory Type |
- DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
|
| DIMM Sizes |
- 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
|
| Network Connectivity |
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
| Graphics |
|
| |
|
| NVMe |
|
| LAN |
- Dual 10GBase-T LAN ports via Intel® X710-AT2 + Dual 10G SFP+ via Intel® X710-AT2
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 4 USB 3.0 ports
(2 rear + 1 Type A + 1 front)
|
| VGA |
|
| SAS |
- 12 SAS3 ports support via optional SAS kit
|
| SATA |
- 12 SATA3 ports support via optional kits
|
| Others |
- 1 COM port (rear)
- 2 SATA DOM power connectors
- TPM 2.0 header
|
| |
|
| BIOS Type |
- AMI 128Mb SPI Flash EEPROM
|
| |
|
| Software |
|
| Power Configurations |
- ACPI Power Management
- Power-on mode control for AC power loss recovery
|
| |
|
| CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
| FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Color |
|
| |
|
| Buttons |
- Power On/Off button
- System UID button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LEDs
- UID LED
|
| |
|
| PCI-Express |
- 2 PCI-E 4.0 x16 (FH/HL, 9.5"L)
- 1 PCI-E 4.0 x16 (LP)
- 1 PCI-E 4.0 x16 (internal proprietary LP slot)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| |
|
| Hot-swap |
- 12 Hot-swap 2.5" U.2 NVMe drive bays
|
| |
|
| HDD Backplane |
- Supports 12 NVMe or 12 SAS3 HDD or 12 SATA3
|
|
| |
|
| Fans |
- 8 Heavy duty fans with optimal fan speed control
|
| Air Shroud |
|
| |
|
| 1200W Redundant Power Supplies with PMBus |
| Total Output Power |
- 800W: 100 – 127Vac
- 1200W: 200 – 240Vac
- 1200W: 200 -240Vdc (for CCC only)
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 9.8 - 7A / 50-60Hz
- 200-240Vac / 7.5 - 6A / 50-60Hz
- 200-240Vdc / 7.5 - 6A (for CCC only)
|
| +12V |
- Max: 66.7A / Min: 0A (100-127Vac)
- Max: 100A / Min: 0A (200-240Vac)
- Max: 100A / Min: 0A (200-240Vdc)
|
| +12Vsb |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  Titanium Level
[ Test Report ]
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C ~ 30°C (50°F ~ 86°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
