Motherboard (per Node) Super H12DST-B

	Processor/Chipset (per Node) CPU Dual AMD EPYCTM 7002 Series Processors Socket SP3 Support CPU TDP/cTDP up to 200W Cores Up to 64 Cores Note Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization

System Memory (per Node) Memory Capacity 16 DIMM slots Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs 8-channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks Memory Type DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs Memory Sizes 8GB, 16GB, 32GB, 64GB, 128GB, 256GB Memory Voltage 1.2V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)

	On-Board Devices (per Node) Chipset System on Chip Storage SATA3 (6Gbps) via AMD EPYC Network 1 PCI-E 4.0 x16 SIOM LAN Networking Slot for flexible networking, see SIOM LAN options support matrix (Must bundle with at least one SIOM network card) IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Video ASPEED AST2500 BMC

	Input / Output (per Node) LAN Provided via SIOM (optional) 1 RJ45 Dedicated IPMI LAN port USB 2 USB 3.0 ports (rear) Video 1 VGA port DOM 1 SuperDOM (Disk on Module) port Others 1 COM port (header) 1 TPM 2.0 header

	System BIOS (per Node) BIOS Type AMI 32Mb SPI Flash ROM

	Management (per Node) Software IPMI 2.0 KVM with dedicated LAN SSM, SUM SuperDoctor 5 Watch Dog Power Configurations ACPI / APM Power Management

	Chassis Form Factor 2U Rackmount Model CSE-217BHQ+-R2K22BP2

	Available Colors Black

	Front Panel (per Node) Buttons Power On/Off button UID button LEDs Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED

	Expansion Slots (per Node) PCI-Express 2 PCI-E 4.0 (x16) Low-profile slots 1 SIOM card support (must bundle with network card) M.2 Interface: 1 SATA/PCI-E 3.0 x4 Form Factor: 2280, 22110 Key: M-key

	Drive Bays (per Node) Hot-swap 6 Hot-swap 2.5" SATA3 drive bays

	System Cooling Fans 4 Heavy duty 8cm PWM fans

Power Supply 2200W Redundant Power Supplies with PMBus Total Output Power 1200W/1800W/1980W/2090/2200W Dimension (W x H x L) 45 x 40 x 480 mm Input 1200W: 100-127Vac / 50-60Hz 1800W: 200-220Vac / 50-60Hz 1980W: 220-230Vac / 50-60Hz 2090W: 230-240Vac / 50-60Hz 2090W: 180-220Vac (for UL/cUL only) 2200W: 220-240Vac (for UL/cUL only) 2090W: 230-240Vdc (for CCC only) +12V Max: 100A / Min: 0A (100-127Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 174.17A / Min: 0A (230-240Vac) Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only) Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only) Max: 174.17A / Min: 0A (230-240Vdc, CCC only) 12Vsb Max: 2.1A / Min: 0A Output Type Gold Finger Certification Titanium Level

Operating Environment RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10oC - 30oC (50oF - 86oF) Support for operating above 30oC is available in certain system configurations. Contact your Supermicro sales rep or Technical Support for more details. Non-operating Temperature: -40oC to 60oC (-40oF to 140oF) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

	Item Dimension (L"x W"x H") 40 x 12 x 27 Weight 94.00 LB Warranty Information 1 year