| Product SKUs |
| Brand | Supermicro |
| SYS-1028GQ-TVRT | SuperServer 1028GQ-TVRT (Black) |
| Motherboard |
| | Super X10DGQ |
| Processor/Cache |
| CPU | Intel® Xeon® processor E5-2600 v4 / v3 family (up to 145W TDP) Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | BIOS version 2.0 or above is required |
| GPU | 4 NVIDIA® Tesla® V100 SXM2 GPUs Up to 300GB/s GPU-to-GPU NVIDIA® NVLINK™ |
| System Memory |
| Memory Capacity | 16x 288-pin DDR4 DIMM slots Up to 1TB ECC 3DS LRDIMM, 1TB ECC RDIMM |
| Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices |
| Chipset | Intel® C612 chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| Network Connectivity | Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Graphics | ASPEED AST2400 BMC |
| Input / Output |
| SATA | 6 SATA3 (6Gbps) ports |
| LAN | 2 RJ45 10GBase-TEthernet ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 2 USB 3.0 ports (2 via headers) |
| Video | 1 VGA Connector |
| Serial Port | 1 Serial header |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 USB Keyboard support SMBIOS 2.7.1 UEFI |
| Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-118GQP-R2K05B |
| Dimensions and Weight |
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 35.2" (894mm) 39.3" (997mm) with rails |
| Package | 24" (H) x 8" (W) x 46" (D) |
| Weight | Net Weight: 45 lbs (15.9 kg) Gross Weight: 58 lbs (21.8 kg) |
| Available Colors | Black |
| Front Panel |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2 Network activity LEDs System overheat LED/ Fan fail LED / UID LED |
| Expansion Slots |
| PCI-Express | 3 PCI-E 3.0 x16 slots 1 PCI-E 3.0 x8 (Low Profile) slot |
| Drive Bays |
| Hot-swap | 2x 2.5" Hot-swap drive bays |
| Fixed | 2x 2.5" internal drive bays |
| System Cooling |
| Fans | 7x 4cm heavy duty counter-rotating fans with air shroud & optimal fan speed control |
| Power Supply |
| | 2000W Redundant Power Supplies with PMBus |
| Total Output Power | 1000W/1800W/1980W/2000W |
| Dimension (W x H x L) | 73.5 x 40 x 265 mm |
| Input | 100-120Vac / 12.5-9.5A / 50-60Hz 200-220Vac / 10-9.5A / 50-60Hz 220-230Vac / 10-9.8A / 50-60Hz 230-240Vac / 10-9.8A / 50-60Hz 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only) |
| +12V | Max: 83.3A / Min: 0A (100-120Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 166.7A / Min: 0A (230-240Vac) Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only) |
| 12V SB | Max: 2.1A / Min: 0A |
| Certification | 80 plus Titaninum Level UL/cUL/CB/BSMI/CE/CCC Certified |
| PC Health Monitoring |
| CPU | Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. 5 Phase-switching voltage regulator |
| FAN | Total of seven 4-pin PWM fans 7 fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8 Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | Power Fail / Overheat LED Suspend-state Indicator LED UID LED |
| Other Features | SDDC Support |
| Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |