Supermicro SYS-2026TT-H6RF 2U 4 Node Xeon 5600/5500 DDR3 1333, IPMI, Dual GBLAN, 6x 2.5 SAS, 1400W PSU
Images shown for reference only
Supermicro SYS-2026TT-H6RF 2U 4 Node Xeon 5600/5500 DDR3 1333, IPMI, Dual GBLAN, 6x 2.5 SAS, 1400W PSU 4 Node Xeon 5600/5500 DDR3 1333, IPMI, Dual GBLAN, 6x 2.5 SAS, 1400W PSU: SYS-2026TT-H6RF  
 
Shipping Extra  
ATACOM Part #: SYI2_SUPE_20_13  
   Price: $4483.95

 
Model
Brand Supermicro
SYS-2026TT-H6RF
  • SuperServer 2026TT-H6RF (Black)
Motherboard 4x Super X8DTT-HEF+
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
     
    • Intel® Xeon® Processor X5600/E5600/L5600 Series
      (Westmere) 40W - 95W

       
    • Intel® Xeon® Processor X5500/E5500/L5500 Series
      (Nehalem-EP) 38W - 95W
QPI up to 6.4 GT/a
System Memory
Memory Capacity
  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Infiniband -
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
SAS
  • LSI 6Gbps SAS 2108 w/ Hardware RAID support via BPN-ADP-SAS2-H6iR
  • RAID 0, 1, 5, 6, 10, 50, 60 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Dual Intel® 82574L Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Super I/O
  • Winbond W83527HG chip
Input / Output
Serial ATA
  • Six Serial ATA ports
  • 6 SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Serial Port
  • 1 Fast UART 16550 serial port
Chassis
Form Factor
  • 2U Rackmount
Model
Dimensions
Form Factor

3.5" x 17.2" x 28.5" (H x W x D)

Front Panel
Buttons
  • Power On/Off Button
  • UID Button
LEDs
  • Power LED (on power button)
  • Network activity LED
  • System Overheat/fan fail/power fail/ LED
  • UID LED (on UID button)
Expansion Slots
Left Slot
  • 1 (x16) PCI-E ( Low Profile)
Drive Bays
Hot-swap
  • 6x 2.5" SATA Hot-swap drive bays
Backplane
Hard drive Backplane 2U Hard drive Backplane
System Cooling
Fans
  • 4x Cooling Fans
PSU
Power Supply Redundant 1400W high-efficiency power supply with PMBus
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following: 1. Intel® Xeon® processor 5600/5500
    series, with QPI up to 6.4 GT/s
2. Up to 192GB DDR3 1333/ 1066/
    800MHz ECC Registered DIMM /
   48GB Unbuffered DIMM
3. 1 (x16) PCI-E ( Low Profile)
4. Integrated IPMI 2.0 with KVM and
    Dedicated LAN 5. Dual Intel® 82574L Gigabit
    Ethernet Controller
6. 6x 2.5" Hot-swap SAS Drive Bays
7. 1400W Gold-level High-efficiency
    Redundant Power Supply
 



Graphic Fanless Compact Engine
Jetway JBC361F35-T40E-B


Jetway JBC371F35W-T40E-B
Fanless Graphic Compact Engine


4 HDMI Ports (Optional 10 HDMI Ports)
Jetway NF83 AMD Motherboard


Jetway HBJC128F83-B Digital Signage