| Model |
| Brand | Supermicro |
| SSG-2027R-AR24NV | SuperServer 2027R-AR24NV (Black) |
| Motherboard | Super X9DRH-iF-NV |
| Processor/Cache |
| CPU | Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP)
Note † BIOS version 3.0 or above is required |
| Cache | Up to 30MB |
| QPI GPU/Xeon Phi Support | QPI up to 8 GT/s - |
| System Memory |
| Memory Capacity | 16x 240-pin DDR3 DIMM sockets
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC Registered memory (RDIMM)
Up to 128GB DDR3 ECC and non-ECC UDIMM |
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
Supports NV-DIMM Modules * |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| AHCI SATA | SATA2 (3Gbps) with RAID 0, 1, 5, 10
SATA3 (6Gbps) with RAID 0, 1 |
| Chipset | Intel® C602 Chipset |
| SCU SATA | SATA2 (3Gbps) with RAID 0, 1, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC |
| Network Controllers | Intel® i350 Dual Port GbE
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | Matrox G200eW |
| Super I/O | - |
| Others | - |
| Input / Output |
| AHCI SATA | 2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps) |
| LAN | 2x RJ45 GbE ports
1x RJ45 Dedicated IPMI LAN port |
| SCU SATA SAS | 4x SATA 2.0 ports (3Gbps) 24x SAS3 (12Gbps) ports |
| USB | 4x USB 2.0 ports total (4 rear) |
| VGA | 1x VGA Connector |
| Serial Port | 2x Fast UART 16550 serial COM port
(1 rear & 1 header) |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI |
| Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-216BAC-R920LPB |
| Dimensions |
| Form Factor | 3.5" x 17.2 " x 25.5" (H x W x D) |
| Gross Weight | 61 lbs |
| Front Panel |
| Buttons | Power On/Off button
System Reset button |
| LEDs | Power status LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Power fail LED |
| Expansion Slots |
| PCI-Express | 1x PCI-E 3.0 x16 slot
6x PCI-E 3.0 x8 slots
(slots 1, 2, & 3 are populated by default) |
| Drive Bays |
| Hot-swap | 24x Hot-swap 2.5" SAS3/SATA3 HDD Bays |
| Optional OS Drive | - |
| Backplane |
| Backplane | SAS3/SATA3 Direct Attached Backplane |
| System Cooling |
| Fans | 3x 80mm 7000 RPM PWM fans |
| Shroud | - |
| Power Supply |
| Power Supply | 920W high-efficiency AC-DC Redundant power supplies with PMBus and I2C |
| AC Voltage | 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | 4 Amp @ +5V standby
75 Amp @ +12V
With Power Distributor
+5V: 45 Amp
+3.3V: 24 Amp
-12V: 0.6 Amp
Certification Platinum Level Certified95%+ Platinum Certified
[ Test Report ] |
| With Power Distributor | - |
