| Product SKUs |
| SYS-5028R-WR | SuperServer 5028R-WR (Black) |
| Motherboard |
| Model | Super X10SRW-F |
| Processor |
| CPU | Intel® Xeon® processor E5-2600/1600 v3 family (up to 145W TDP **) Single Socket R3 (LGA 2011) |
| Core / Cache | Up to 18 Cores / Up to 45MB Cache |
| Note | Motherboard supports this maximum TDP. Please verify your system can thermally support |
| System Memory |
| Memory Capacity | 8x 288-pin DDR4 DIMM slots Up to 512GB DDR4 ECC LRDIMM Up to 256GB DDR4 ECC RDIMM |
| Memory Type | 2133/1866/1600/1333MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM/LRDIMM) / 284-pin gold-plated DIMMs |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| Chipset | Intel C612 Express chipset |
| Serial ATA | SATA3 (6Gbps) with RAID 0, 1,10 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Intel® i350-AM2 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | ASPEED AST2400 BMC |
| Input / Output |
| SATA | 8 x SATA3 (6Gbps) ports |
| LAN | 2x RJ45 10GBase-T ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB 2.0 ports (front) 2x USB 2.0, 3.0 ports (rear) |
| Video | 1x VGA Connector |
| Serial Port/Header | 1x Fast UART 16550 serial port 1x internal header |
| System BIOS |
| BIOS Type | 8 MB SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
| Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-825TQ-R500WB |
| Dimensions |
| Height | 3.5" (88.9mm) |
| Width | 17.2" (437mm) |
| Depth | 25.5" (648mm) |
| Weight | Gross Weight: 59 lbs (26.7 kg) Net Weight: 34 lbs (15.4 kg) |
| Available | Black |
| Front Panel |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |
| Expansion Slots |
| PCI-Express | 4x PCI-E 3.0 x8 Full-height Full-length slots 1x PCI-E 3.0 x8 Low-profile Half-length slot |
| Drive Bays |
| Hot-swap | 8x 3.5" Hot-swap SATA3 drive bays |
| System Cooling |
| Fans | 3x 80x80x38mm 7K RPM Cooling fans |
| Power Supply (500W high-efficiency redundant power supplies with PMBus) |
| AC Input | 100-240 V, 50-60 Hz, 6.1-2.6 Amp |
| DC Output | 4 Amp @ +5V standby 41.7 Amp @ +12V |
| With Power Distributor | +5V: 30 Amp +3.3V: 24 Amp -12V: 0.6 Amp |
| Certification | 80 PLUS Platinum Certified |
| PC Health Monitoring |
| Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator |
| FAN | 8x 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Support to monitor Supermicro AOC temperatures from IPMI or SD 5 Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
| LED | Memory DIMM ECC error LEDs CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
| Other Features | 4x 8-pin GPU power connectors Chassis intrusion detection Chassis intrusion header SDDC Support RoHS |
| Operating Environment/Compliance |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature:
10°C to 35°C (50°F to 95°F) Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:
8% to 90% (non-condensing) Non-operating Relative Humidity:
5% to 95% (non-condensing) |
