| Model |   
    | Brand |   Supermicro |   
    | SYS-2027TR-HTRF+ |   SuperServer 2027TR-HTRF+ (Black) |   
    | Motherboard |   Super X9DRT-HF+ |   
    | Processor/Cache |   
    | CPU |   Intel® Xeon® processors E5-2600 family Socket R (LGA 2011) |   
    | Cache |   - |   
    | System Bus |   - |   
    | System Memory |   
    | Memory Capacity |      8x 240-pin DDR3 DIMM sockets Supports up to 256 GB DDR3 ECC Registered memory (RDIMM) Supports up to 64 GB DDR3 ECC Un-Buffered memory (UDIMM)    |   
    | Memory Type |   1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |   
    | DIMM Sizes |      32GB, 16GB, 8GB, 4GB, 2GB, 1GB    |   
    | Memory Voltage |   1.5 V / 1.35V |   
    | Error Detection |      Corrects single-bit errors Detects double-bit errors (using ECC memory)    |   
    | On-Board Devices |   
    | SATA |      SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1, 5, 10    |   
    | Chipset |      Intel® C602 Chipset    |   
    | SAS |      LSI 2008 SAS (6Gbps) RAID 0, 1, 10 support (Optional: AOC-SAS2-RAID5-KEY) RAID 5 support    |   
    | IPMI |      Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Renesas SH7757 BMC    |   
    | Network Controllers |      Intel® i350 Dual port GbE LAN Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)    |   
    | Graphics |      Matrox G200eW 16MB DDR2 graphics controllers    |   
    | Super I/O |   - |   
    | Clock Generator |   - |   
    | Input / Output |   
    | Serial ATA |      2 SATA 3.0 ports (6Gbps) 4 SATA 2.0 ports (3Gbps)    |   
    | SAS |      -    |   
    | LAN |      2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port    |   
    | USB |   8 USB 2.0 ports total (4 rear + 4 via headers) |   
    | VGA |   1x VGA port |   
    | Serial Port / Header |   1x Fast UART 16550 serial port 1x internal header |   
    | System BIOS |   
    | BIOS Type |   8MB SPI Flash EEPROM with AMI BIOS |   
    | BIOS Features |   DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |   
    | Chassis |   
    | Form Factor |   2U Rackmount |   
    | Model |   CSE-825TQ-R500WB |   
    | Dimensions |   
    | Form Factor |   3.5" x 17.2 " x 36" (H x W x D) |   
    | Gross Weight |   36 lbs (16.3kg) |   
    | Front Panel |   
    | Buttons |      Power On/Off button System Reset button    |   
    | LEDs |      Hard drive activity LED 2x Network activity LEDs System Overheat LED    |   
    | Expansion Slots |   
    | PCI-Express |   4x PCI-E 3.0 x8 Full-height slots 1x PCI-E 3.0 x8 Low-profile slot UIO AOC Compatibility Matrix |   
    | Drive Bays  |   
    | Hot-Swap |   8x 3.5" Hot-swap drive bays |   
    | Backplane |   
    | Backplane |   SAS/SATA HDD Backplane (SAS support requires optional SAS controller) |   
    | System Cooling |   
    | Fans |      3x 80x80x38mm 7K RPM Cooling fans    |   
    | Power Supply |   
    | Power Supply |   500W high-efficiency redundant power supplies with PMBus |   
    | AC Input |      100-240 V, 50-60 Hz, 6.1-2.6 Amp    |   
    | DC Output |      4 Amp @ +5V standby   41.7 Amp @ +12V With Power Distributor  +5V: 30 Amp +3.3V: 24 Amp -12V: 0.6 Amp Certification   80PLUS Platinum   [ Test Report ]    |