System Form Factor: 2U Rackmount Chassis Model: TN200 Motherboard Name: (4) S7108GMR (4 blades in one chassis) Board Dimension: 6.79" x 20.26" (172.4 x 514.7mm) Blade Dimension (D x W x H): 20.66" x 7.06" x 1.6" (524.8 x 179.3 x 40.7mm) Feature: Four blades in one chassis

	Front Panel Buttons: (4) ID w/ LED / (4) PWR w/ LED I/O Ports: (4) Display ports (2 x USB2.0 + 1 x D-SUB VGA ports w/ via cable, per port )

	External Drive Bay (per blade) Qty / Type: (3) 3.5" Hot-Swap HDD Bays, Total (12) devices HDD backplane support: (12) SAS 12Gb/s / SATA 6.0Gb/s Supported HDD Interface: SATA 6Gb/s

	System Cooling Configuration (per blade) FAN: (4) 8cm fans

	Processor (per blade) Qty / Socket Type: (2) LGA3647 Supported CPU Series: Intel Xeon Processor Scalable Families Thermal Design Power (TDP) wattage: Max up to 165W System Bus: Up to 10.4/9.6 GT/s with Intel UltraPath Interconnect (UPI) support Notification: 165W CPUs are supported with certain system configurations. Please contact Tyan Technical Support for additional information.

	Chipset (per blade) PCH: Intel C621

	Memory (per blade) Supported DIMM Qty: (8)+(8) DIMM slots DIMM Type / Speed: Up to 512GB RDIMM/ 1,024GB LRDIMM/ 2,048GB LRDIMM 3DS Follow latest Intel DDR4 Memory POR Memory channel: 6 Channels per CPU Memory voltage: 1.2V

	Expansion Slots (per blade) PCI-E: (1) PCI-E Gen3 x16 slot (Half-height, Half-length) / (1) PCI-E Gen3 x8 slot (Half-height, Half-length) / (1) PCI-E Gen3 x16 OCP 2.0 slot (conn.A+conn.B+conn.C) Pre-install TYAN Riser Card: (1) M7108T200-L16-1L riser card for (1) PCI-E Gen3 x16 slot / (1) M7108T200-R8-1L riser card for (1) PCI-E Gen3 x8 slot

	LAN (per blade) Qty / Port: (1) PHY PHY: Realtek RTL8211E

	Storage (per blade) sSATA Connector: (2) 8-pin SATA DOM Controller: Intel C621 Speed: 6.0 Gb/s RAID: RAID 0/1/10/5 (Intel RSTe) M.2 connector: (2) M.2 connector (22110/2280) by PCI-E interface

	Graphic (per blade) Connector type: D-Sub 15-pin Resolution: Up to 1920x1200 Chipset: Aspeed AST2500

	I/O ports (per blade) USB: (2) USB3.0 (at rear) COM: (1) DB-9 COM port VGA: (4) Display ports (2 x USB2.0 + 1 x D-SUB VGA ports w/ via cable, per port, at front ) RJ-45: (1) GbE port dedicated for IPMI

	TPM (per blade) TPM Support: Please refer to our TPM supported list.

	System Monitoring (per blade) Chipset: Onboard Aspeed AST2500 Temperature: Monitors temperature for CPU and memory and system environment Voltage: Monitors voltage for CPU, memory, chipset and power supply LED: Over temperature warning indicator, Fan and PSU fail LED indicator Others: Watchdog timer support

	Server Management (per blade) AST2500 IPMI Feature: 24-bit high quality video compression, 10/100/1000 Mb/s MAC interface AST2500 iKVM Feature: IPMI 2.0 compliant baseboard management controller (BMC), Supports storage over IP and remote platform-flash, USB 2.0 virtual hub Onboard Chipset: Onboard Aspeed AST2500

	BIOS (per blade) Brand / ROM size: AMI / 32MB Feature: Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / User Configurable FAN PWM Duty Cycle / Console Redirection / ACPI sleeping states S4,S5 / ACPI 6.1

	Power Supply Type: RPSU Input Range: AC 200-240V/13A Output Watts: 2,200 Watts Efficiency: PFC / 80 plus Platinum Redundancy: 1+1

	Operating System OS supported list: Please refer to our AVL support lists.

	Regulation FCC (DoC): Class A CE (DoC): Class A CB/LVD: Yes RCM: Class A VCCI: Class A

	Operating Environment Operating Temp.: 10o C - 35o C (50o F- 95o F) Non-operating Temp.: - 40o C - 70o C (-40o F - 158o F) In/Non-operating Humidity: 90%, non-condensing at 35o C

	RoHS RoHS 6/6 Compliant: Yes

	Package Contains Barebone: (1) TN200-B7108 Barebone Manual: (1) Quick Installation Guide Installation CD: (1) TYAN Device Driver CD

	Item Dimension (L"xW"xH") NA Weight 84 lbs Warranty Information 3 Years