| Model |
| Brand | Supermicro |
| SYS-1026GT-TF-FM175 | SuperServer 1026GT-TF-FM175 (Black) |
| Motherboard | Super X8DTG-DF |
| Processor/Cache |
| CPU | Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Intel® Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 95W
Intel® Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W |
| QPI | up to 6.4 GT/s |
| System Memory |
| Memory Capacity | 6x 240-pin DIMM sockets
Supports up to 192GB DDR3 ECC Registered memory
Memory Mirroring supported |
| Memory Type | 1866/1600/1333/1066/800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
NVDIMM support. (Not all vendor's NVDIMM are supported. Please contact your sales representative for details) |
| DIMM Sizes | 1GB, 2GB, 4GB , 8GB , 16GB , 32GB |
| Memory Voltage | 1.5 V / 1.35V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices |
| GPU | - |
| Chipset | Intel® C602J chipset |
| SATA | LSI 2308 SAS2 (6Gbps)
SAS2 Expander
Scalability through cascading
6Gb SAS2/SATA2 HDD support
Inband SES-2 Enclosure Management |
| IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC |
| Network Controllers | Intel® i350 Dual-Port Gigabit Ethernet Controller
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization |
| Graphics | Matrox G200eW 16 MB DDR2 |
| Super I/O | Winbond 83527HF chip |
| Others | PCI-E 3.0 x8 node to node/NTB connectivity
PLX Technology PEX8717; PLX ExpressNIC SDK available from PLX. NDA requ |
| Input / Output |
| Serial ATA | Six Serial ATA ports
Six SATA hard drives supported |
| LAN | 2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port |
| USB | 2 rear + 1 header (2 Ports)
4 total USB ports, 2.0 Compliant / 1.1 Compliant |
| VGA | 1x VGA Port |
| Serial Port | 1 Fast UART 16550 serial port |
| System BIOS |
| BIOS Type | 16MB SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP)
PCI 2.3
ACPI up to 5.0
USB Keyboard suppor |
| Chassis |
| Form Factor | 3U Rackmount |
| Model | CSE-937ETS-R1200NDBP |
| Dimensions |
| Form Factor | 5.2" x 17.2 " x 25.5" (H x W x D) |
| Gross Weight | 75 lbs (34.02kg) |
| Front Panel |
| Buttons | Power On/Off button
System Reset button
Alarm Mute Switch |
| LEDs | Power LED
Hard Drive Activity LED
2x Network Activity LED
System Overheat LED
Power Fail LED |
| Expansion Slots |
| PCI-Express | 3x PCI-E 3.0 x8 slots (on riser) |
| Drive Bays |
| Hot-Swap | 16x Hot-swap 3.5" Drive Bays
SAS or enterprise SATA HDD only recommended
SATA drives require LSI interposer |
| Backplane |
| Backplane | SAS/SATA HDD Backplane
(SAS support requires optional SAS controller) |
| System Cooling |
| Fans | 12x PWM Fans |
| Power Supply |
| Power Supply | 920W high-efficiency AC-DC Redundant power supplies with PMBus and I2C |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 Amp |
DC Output
+5V standby | 4 Amp @ +5V standby
75 Amp @ +12V
With Power Distributor
+5V: 45 Amp
+3.3V: 24 Amp
-12V: 0.6 Amp |
| DC Output +12V | 100 Amp @ 100-140V
117 Amp @ 180-240V |
