| Product
SKUs |
| Brand |
Supermicro |
| Model |
SYS-7045W-NTR+B |
| Motherboard |
Super X7DWN+ |
| Processor/Cache
|
| CPU
|
Dual 771-pin
LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s)
of the same type below:
Quad-Core Intel®
Xeon®Processor 5400/5300 sequence (Harpertown/Clovertown
processor) up to 3.00 GHz
Dual-Core Intel®
Xeon®Processor 5200/5100 sequence (Wolfdale/Woodcrest
processor) up to 3.16 GHz |
| System
Bus |
1600 /
1333 / 1066 MHz system bus |
| System
Memory |
| Memory
Capacity |
Sixteen
240-pin DIMM sockets
Supports up to 128 GB 800 / 667 / 533MHz DDR2 ECC FB-DIMM
memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported |
| Memory
Type |
800 / 667
/ 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM
72-bit, 240-pin gold-plated DIMMs |
| DIMM
Sizes |
512 MB,
1GB, 2GB, 4GB , 8GB** |
| Memory |
1.8 V or
1.5 V |
| On-Board
Devices |
| Chipset |
Intel®
5400 (Seaburg) chipset
ESB2 |
| SATA |
Intel ESB2
SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Wondows only) |
| IPMI |
Support
for Intelligent Platform Management Interface v.2.0 /
1.5
200-pin IPMI slot (SIMSO(+))
(Optional: AOC-SIMSO(+))
For Dedicated LAN, cable CBL-0177L must be used (cable
sold separately) |
| Network
Controller |
Intel®
82575 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable
networking |
| VGA |
ATI
ES1000 controller with 32 MB of video memory |
| Super
I/O |
Winbond
83627HG chip |
| Clock
Generator |
N/A |
| Expansion
Slots |
| PCI-Express |
3 (x8)
PCI-e slots (2 w/ Gen 2.0)
1 (x4) PCI-e slot |
| PCI-X |
2x 64-bit
133MHz PCI-X (3.3V) slots |
| UIO |
1x UIO
slot |
| Input
/ Output |
| Serial
ATA |
Six Serial
ATA ports
Six SATA hard drives supported |
| IDE |
Single
EIDE channel supports up to two UDMA IDE devices (IDE-M,
IDE-S) including CF(Compact Flash) Card
Compact Flash (40-pin connector, IDE 1, single channel)
slot
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy |
1 Floppy
controller; 1.44 MB, 2.88 MB |
| LAN |
2x RJ45
LAN ports |
| USB |
2x USB
rear ports
3x USB internal headers
Total 5 USB 2.0 Compliant / 1.1 Compliant |
| VGA |
1x VGA
port |
| Serial
Port/Header |
1 Fast
UART 16550 serial port
1 Serial header |
| Chassis
|
| Form
Factor |
4U Rackmountable
/ Tower
Optional Rackmount Kit (CSE-PT26) |
| Model
|
SC745TQ-R800
|
| Dimensions
|
| Height
|
7.0" (178mm) |
| Width
|
17.2"
(437mm) |
| Depth
|
25.5"
(648mm) |
| Gross
Weight |
63
lbs (28.6kg) |
| Available
Colors |
Beige,
Black |
| Front
Panel |
| Buttons
|
Power
On/Off button
System Reset button |
| LEDs
|
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Fan Fail LED
Power Fail LED |
| Ports |
2x USB
Ports |
| Drive
Bays |
| Hot-swap |
8x Hot-swap
Drive Bays
Supports up to 6x SATA Hard Drives
|
| Peripheral
Bay(s) |
2x 5.25"
Peripheral Drive Bay
1x 5.25" Bay For Floppy Drive
|
| Peripheral
Drives |
| Floppy |
Panasonic
3.5" 1.44MB Floppy Drive
|
|
Backplane |
| Backplane |
SAS
/ SATA Backplane w/ Enclosure Management
|
| System
Cooling |
| Fans |
3x 5000
RPM Hot-Swappable Cooling Fans
2x 5000 RPM Hot-Swappable Rear Exhaust Fan |
|
Shroud |
1x
Air Shroud |
| Power
Supply |
|
800W (1
+ 1) Redundant AC-DC high-efficiency power supply w/ PFC |
| AC
Voltage |
100
- 240V, 50-60Hz, 10-4 Amp |
| DC
Output |
N/A |
| +5V
|
30 Amp |
| +5V
standby |
4 Amp |
| +12V
|
66 Amp |
| -12V
|
0.6
Amp |
| +3.3V
|
24
Amp |
| System
BIOS |
| BIOS
Type |
8Mb Flash
EEPROM with Phoenix® BIOS
EFI BIOS Support |
| BIOS
Features |
Plug and
Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3 |
|
PC Health Monitoring |
| CPU |
Monitors
for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby,
+5V Standby, VBAT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from
0.8375V-1.60V |
| FAN |
Total of
eight fan headers supporting up to 8 fans
Four 4-pin fan headers
Four 3-pin fan headers
8x fans with tachometer status monitoring
Status monitor for speed control
Support 3-pin fans
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors |
| Temperature |
Monitoring
for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
Thermal Monitor 2 (TM2) support
PECI |
|
LED |
CPU / System
Overheat LED |
|
Other Features |
Chassis
intrusion detection
Chassis intrusion header
SDDC Support |
