| Physical Stats |
| Form Factor |
Extended ATX |
| Dimensions |
12" x 13.05" (30.5cm x 33.2cm) |
| Processor/Cache |
| CPU |
Dual 604-pin FC-mPGA4 Sockets
Supports up to two Intel® 64-bit Xeon™ processor(s)
of the same type below:
Xeon (Nocona) CPU with 1MB L2 Integrated
Advanced Transfer Cache, up to 3.60 GHz
Xeon (Irwindale) CPU with 2MB L2 Integrated
Advanced Transfer Cache, up to 3.60 GHz
Xeon LV (Low Voltage) CPU , up to 2.8 GHz
|
| System Bus |
800 MHz system bus |
| Operating System
Software |
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
OS
Compatibility Chart
|
| System Memory |
| Memory Capacity |
Eight 184-pin DIMM sockets
Supports up to 16 GB DDR 333 memory or
Supports up to 32 GB DDR 266 memory
Dual channel memory bus
Memory must be populated in pairs
Single-rank modules are recommended for 6+ DIMM
support |
| Memory Type |
DDR333/266MHz buffered (registered) ECC SDRAM 72-bit,
184-pin gold-plated DIMMs |
| DIMM Sizes |
256 MB, 512 MB, 1GB, 2GB, 4GB** |
| Memory Voltage |
2.5 V only |
| Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 Single Device Data Correction
(SDDC) |
| On-Board Devices |
| Chipset |
Intel® E7520 chipset
MCH + 6300ESB + PXH +82541GI |
| SATA |
6300ESB (Hance Rapids) SATA Controller
RAID 0, 1, JBOD support |
| IPMI |
Support for Intelligent Platform Management Interface
v.2.0
( Optional:
AOC-IPMI20-E )
|
| Network Controllers |
2x Intel® 82541GI Single Port Gigabit Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output |
| Graphics |
ATI Rage XL SVGA PCI video controller with 8 MB
of video memory |
| Super I/O |
Winbond 83627HF chip |
| Input / Output |
| Serial ATA |
Two Serial ATA ports
Two SATA hard drives supported |
| IDE |
Dual EIDE channels support up to four UDMA IDE
devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy |
1 Floppy controller; 1.44 MB, 2.88 MB |
| LAN |
2x RJ45 LAN port |
| USB |
2x USB rear ports
2x USB internal headers
USB 2.0 Compliant / 1.1 Compliant |
| VGA |
1x VGA port |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| Serial Ports |
2 Fast UART 16550 serial ports |
| Parallel Port |
1 ECP/EEP parallel port |
| Chassis ( Optimized
for X6DHE-G2 ) |
| 2U Chassis |
SC823i-550LP
SC823i-R500LP
|
| Rackmount Tower
/ 4U |
SC742i-420
SC742i-600
SC743i-R760
SC743i-650
SC942i-600
SC942i-R760
|
| Important Chassis
Notes |
To ensure system stability, a 420W (minimum) ATX
power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
Chassis must have CPU mounting holes required for
800MHz FSB CPUs with this serverboard. |
| Expansion Slots |
| PCI-Express |
2 (x8) PCI-e slots |
| PCI-X |
1x 64-bit 133MHz PCI-X (3.3V) slot
2x 64-bit 100MHz PCI-X (3.3V) slots |
| PCI |
1x 32-bit 33MHz PCI (5V) slot |
| System BIOS |
| BIOS Type |
8Mb Flash EEPROM with Phoenix® BIOS |
| BIOS Features |
Plug and Play (PnP)
SMBIOS 2.3
APM 1.2
DMI 2.1
ACPI 1.0
Fan Speed Control |
| Management |
| Software |
Optional IPMI (Intelligent Platform Management
Interface) 2.0
Super Doctor
III
Watch Dog
NMI |
| Power Configurations |
ACPI/APM Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
CPU Fan auto-off in sleep mode
Power-on mode control for AC power loss recovery
Internal/External modem remote ring-on |
| PC Health Monitoring |
| CPU |
Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V
Standby
CPU Core 3-Phase-switching voltage regulator with
auto-sense from 0.83V-1.56 |
| FAN |
Total of four 4-pin and four 3-pin fan headers
8x fans with status monitoring
Status monitor with firmware/software on/off control
Low noise fan speed control
4x Pulse Width Modulated (PWM) fan connector |
| Temperature |
Monitoring for CPU, chassis, environment
CPU thermal trip support |
| LED |
CPU Overheat LED
System Overheat LED
Suspend-state indicator LED |
| Other Features |
Chassis intrusion detection
Chassis intrusion header |
