|
SUPERMICRO
SUPERSERVER 6031 P3 TOWER SERVER, IDE |
|
|
|
SUPERMICRO SUPERSERVER
6031 |
|
|
|
Shipping
Extra |
|
ATACOM
Part #: SYSR_SUPE_60_35 |
|
Price: $
|
|
|
|
|
Motherboard
Super P3TDL3
Processor/Cache
CPU • Dual FCPGA370 ZIF Sockets
• Supports an Intel® Pentium® III processor
with 512KB of integrated Advanced Transfer Cache up to 1.4GHz
System Bus 133MHz/100MHz system bus
System Memory
Memory Capacity • Four 168-pin DIMM sockets
• Supports up to 4 GB of PC133/100 memory
Memory Type • PC133/100 72-bit registered ECC SDRAM,
168-pin gold-plated DIMMs
DIMM Sizes 64 MB, 128 MB, 256 MB, 512 MB, 1 GB
Memory Voltage 2.5 V only
On-Board Devices
Chipset • Serverworks™ Serverset III LE chipset
• CNB30LE + OSB4/OSB5
SCSI • Adaptec AIC-7892 Controller
• Single-Channel Ultra160 SCSI
Network Controllers • 2x Intel® 82559 10/100 Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45
output
Graphics ATI Rage XL SVGA PCI video controller with 8 MB of
video memory
Input / Output
PCI Expansion • 2x 64-bit 66/33MHz PCI (3.3V) slots
• 2x 32-bit 33MHz PCI (5V) slots
IDE • Dual EIDE channels support up to four UDMA IDE
devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
USB Up to 2 USB ports
Serial Ports 2 Fast UART 16550 serial ports
Parallel Port Port header provided; parallel cable required
for parallel port
Floppy 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
Keyboard / Mouse PS/2 keyboard and mouse ports
System BIOS
BIOS Type 4Mb Flash EEPROM with AMI® BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• DMI 2.1
• PCI 2.2
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
• USB Keyboard support
|
Chassis
Form Factor Pedestal Server Tower
Model SC830-W
Dimensions
Height 19.9" (505mm)
Width 15.0" (381mm)
Depth 22.8" (579mm)
Gross Weight 104 lbs (47.3kg)
Available Colors Beige, Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power Fail LED
Drive Bays
Hot-swap • 4x 1" SCA Ultra320/160 Hot-swap Drives
Peripheral Bay(s) • 9x 5.25" Peripheral Drive Bays
• 2x 3.5" Peripheral Drive Bays
SCSI Backplane
SCAU160 SCA SCSI Backplane for Pedestal Chassis
System Cooling
Fans • 4x 90mm Hot-swappable Fans
• 2x 90mm Rear Exhaust Fan
Power Supply
300W + 300W Redundant Hot-swap AC power supply w/ PFC
+5V 30.0 Amp
+5V standby 1.5 Amp
+12V 12.0 Amp
+3.3V 15.0 amp
PC Health Monitoring
CPU • Monitors for CPU Cores, +5, ±12V
• CPU Core auto-switching voltage regulator w/ auto-sense
from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via
BIOS)
FAN • Total of seven 3-pin fan headers
• 2x fans with tachometer monitoring
• Status monitor with firmware/software on/off control
Temperature • Monitoring for CPU, chassis, environment
LED • CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED
Other Features • Chassis intrusion detection (through
LDCM)
• Chassis intrusion header
|
|
|
1.
Dual Intel® Pentium® Support up to 1.4 GHz
2. Up to 32GB DDR 266/200 SDRAM (with Memory Expansion Card)
3. 6x 64-bit PCI-X expansion slots
4. 1x Intel® 82550 10/100 Ethernet Port
5. Zero Channel RAID Support
6. 10 x 1" hot-swap Ultra160 SCSI Drive Bays
7. Triple-Redundant 350W power supply
|