Motherboard |
Motherboard |
• Super
X6DH3-G2 |
Processor/Cache |
CPU |
• Dual 604-pin FC-mPGA4 Sockets
• Supports up to two Intel® 64-bit Xeon processor(s)
of the same type below:
• Xeon (Nocona) CPU with 1MB L2 Integrated
Advanced Transfer Cache, up to 3.60 GHz
• Xeon (Irwindale) CPU with 2MB L2 Integrated
Advanced Transfer Cache, up to 3.60 GHz
• Xeon LV (Low Voltage) CPU , up to 2.8 GHz
|
System Bus |
• 800 MHz system bus
|
Operating System
Software |
• Supports 64-bit Operating Systems
• Supports 32-bit Operating Systems
|
System Memory |
Memory Capacity |
• Eight 240-pin DIMM sockets
• Supports up to 16 GB DDRII 400MHz memory
• Dual channel memory bus
• Memory must be populated in pairs
• Single-rank modules are recommended for 6+ DIMM
support
|
Memory Type |
• DDRII 400MHz buffered (registered) ECC SDRAM 72-bit,
240-pin gold-plated DIMMs
|
DIMM Sizes |
• 2GB
|
Memory Voltage |
• 1.8 V only
|
Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 Single Device Data Correction
(SDDC)
|
On-Board Devices |
Chipset |
• Intel® E7520 chipset
• MCH + 6300ESB + PXH/V + 82541PI
|
SAS |
• Adaptec AIC9410: Adaptec 8-port SAS Controller
• RAID 0, 1, JBOD support
|
SATA |
• 6300ESB 2-port SATA Controller
|
SAS ZCR |
• Supermicro All-In-One ZCR card: AOC-LPZCR1
• (Optional Card)
• RAID 0, 1, 5, 10, and JBOD support
|
IPMI |
• Support for Intelligent Platform Management Interface
v.2.0
• ( Optional:
AOC-IPMI20-E )
|
Network Controllers |
• Dual Intel® 82541PI Single-Port Gigabit Controller
|
Graphics |
• ATI Rage XL SVGA PCI video controller with 8 MB
of video memory
|
Super I/O |
• Winbond 83627HF chip
|
Input / Output |
Serial ATA / SAS |
• Two SAS connectors support up to 8 SAS or SATA
drives
• Two SATA connectors support 2 SATA drives
|
IDE |
• Dual EIDE channels support up to four UDMA IDE
devices
• Supports ATA/100
|
Floppy |
• 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
|
LAN |
• 2x RJ45 LAN port
|
USB |
• 2x USB rear ports
• 2x USB internal headers
• USB 2.0 Compliant / 1.1 Compliant
|
VGA |
• 1x VGA Port
|
Keyboard / Mouse |
• PS/2 keyboard and mouse ports
|
Serial Ports |
• 1 Fast UART 16550 serial ports
• 1 header
|
Chassis |
Form Factor |
• 2U Rackmount |
Model |
• SC823T-R500LP |
Dimensions |
Height |
• 3.5" (89mm) |
Width |
• 16.8" (426mm) |
Depth |
• 25.6" (650mm) |
Gross Weight |
• 51 lbs (23.1kg) |
Available Colors |
• Beige, Black |
Front Panel |
Buttons |
• Power On/Off
button
System Reset button |
LEDs |
• Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Power Fail LED |
Ports |
• 2x USB Ports
(optional) |
Expansion Slots |
PCI-Express |
• 2 (x8) PCI-e slots
|
PCI-X |
• 1x 64-bit 133MHz PCI-X (3.3V) slot
• 2x 64-bit 100MHz PCI-X (3.3V) slots
|
PCI |
• 1x PCI slot
|
|
• (Low-profile Add-on Cards Only)
|
Drive Bays |
Hot-swap |
• 6x 1" SATA
Hot-swap drive trays |
Peripheral Bay(s) |
• 1x 5.25" full-height
peripheral bay |
Peripheral Drives |
Floppy |
• Panasonic
3.5" 1.44MB Floppy Drive |
Backplane |
|
• 1x 2U SAS Backplane
(without SESII) |
System Cooling |
Fans |
• 4x 80mm 6300
RPM fans
Cooling redundancy with fan shroud |
Power Supply |
|
• Redundant 2U 500W
AC power supply with PFC
[ 24-pin, (8-pin, 4-pin)=12V) ] |
AC Voltage |
• 100 - 240V,
50/60Hz, 10 Amp |
DC Output |
• 5V + 3.3V = 160W
12V Total = 39 Amp |
+5V |
• 30.0 amp |
+5V standby |
• 2.0 amp |
+12V 1 |
• 15.0 amp |
+12V 2 |
• 15.0 amp |
+12V 3 |
• 18.0 amp |
-12V |
• 1.0 amp |
+3.3V |
• 21.0 amp |
System BIOS |
BIOS Type |
• 8Mb Flash EEPROM with Phoenix® BIOS
|
BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• Fan Speed Control
|
PC Health Monitoring |
CPU |
• Monitors for CPU Cores, CPU0, CPU1, +3.3V, +5V, ±12V
|
FAN |
• Total of four 4-pin fan headers and four 3-pin
fan headers
• 8x fans with tachometer status monitoring
• Low noise fan speed control
|
Temperature |
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Monitor 2 (TM2) support
|
Other Features |
• Chassis intrusion detection
• Chassis intrusion header
|