Jetway JNF695HV-3455 Motherboard Mini-ITX, Apollo Lake, Celeron J3455 Quad-core, VGA, HDMI, LVDS/eDP, 2 X LAN, 10 X COM
Images shown for reference only
Shipping Extra

IMBM_JETA_AP_0F

Manufacturer Part#:JNF695HV-3455

 
   Price: $380.95

 
Specification
Model Name NF695
Part Number JNF695HV-3455 JNF695L-3455
Form FactorMini-ITX (170 x 170mm)
ProcessorIntel® Celeron J3455 Processor Quad Core 1.50 GHz - 2.30 GHz, 10W TDP
Memory1 * 204-pin DDR3L-1866 up to 8GB total, 1.35V required
GraphicsIntel HD Graphics 500, 250MHz - 750MHz (J3455)
AudioRealtek ALC662 HD Audio
LAN2 x Realtek RTL8111H Gigabit LAN1 x Realtek RTL8111H Gigabit LAN
Storage1 x SATA3 6Gb/s Connector
1 x M.2 SATA M-key 2242/2260
Super IOFINTEK F81768D
TPMIntel fTPM 2.0 (PTT) Trusted Computing Firmware
OEM Option: Onboard TPM v1.2 or v2.0
Back Panel Connectors
External IO 1 12V DC-in Jack
1 VGA (1920*1200 @60)
2 RJ45 LAN (10/100/1000)
1 HDMI 1.4 (3840*2160 @30Hz)
4 USB 3.0
1 3.5mm Audio (Line out)
1 12V DC-in Jack
1 RJ45 LAN (10/100/1000)
2 HDMI 1.4 (3840*2160 @30Hz)
4 USB 3.0
1 3.5mm Audio (Line out)
Onboard I/O Connectors
Internal IO 1 SATA3 6Gb/s Connector
1 M.2 SATA 2242/2260
1 Mini PCI-E Slot (Full-size)
10 Serial Headers (1 * RS232/422/485, 9 * RS232) (2.00mm)
3 USB Headers for 6 * USB 2.0 (2.54mm)
1 24-bit Dual Channel LVDS (1920 x 1200)
1 eDP Header (2560 x 1600 60Hz or 1920 x 1400 75Hz)
1 SIM Card Socket
1 AT/ATX Mode Jumper
1 8-bit GPIO Header
1 9-pin Front Audio Header
1 5-pin SMBUS/I2C Header
1 7-pin PS/2 Header
2 4-pin Fan Header
1 4-pin Power-out Connector
1 2-pin +12V Alternate Power-in
1 SATA3 6Gb/s Connector
1 M.2 SATA 2242/2260
1 Mini PCI-E Slot (Full-size)
2 Serial Headers (2 * RS232) (2.00mm)
1 USB Headers for 2 * USB 2.0 (2.54mm)
1 24-bit Dual Channel LVDS (1920 x 1200)
1 eDP Header (2560 x 1600 60Hz or 1920 x 1400 75Hz)
1 AT/ATX Mode Jumper
1 8-bit GPIO Header
1 9-pin Front Audio Header
1 5-pin SMBUS/I2C Header
1 7-pin PS/2 Header
2 4-pin Fan Header
1 4-pin Power-out Connector
1 2-pin +12V Alternate Power-in
Power Supply for NF695
External Power Supply – the board can be powered with a +12V external power supply though a locking DC connector on the back panel. The rear +12V DC jack accepts locking plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +12V 2-pin power connector, where pin 1 is +12V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.

Caution: There is no isolation circuitry between the external +12V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V DC jack is covered if the internal 2-pin power connector is to be used.
Market Segments Supported
√ Industrial Computer
√ Industrial Automation/Control
√ Medical
√ AIO
√ Retail (POS/Kiosk/ATM)
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
 



Graphic Fanless Compact Engine
Jetway JBC361F35-T40E-B


Jetway JBC371F35W-T40E-B
Fanless Graphic Compact Engine


4 HDMI Ports (Optional 10 HDMI Ports)
Jetway NF83 AMD Motherboard


Jetway HBJC128F83-B Digital Signage