Product SKUs | |||
Brand | Supermicro | ||
SSG-6029P-E1CR24L | SuperServer 6029P-E1CR24L(Black) | ||
Motherboard | |||
Super X11DSC+ | |||
Processor/Cache | |||
CPU | Dual Socket P (LGA 3647) Intel® Xeon® Scalable Processors, Dual UPI up to 10.4GT/s Support CPU TDP up to 70-165W | ||
Cores | Up to 28 Cores with Intel® HT Technology | ||
System Memory | |||
Memory Capacity | 24 DIMM slots Up to 3TB ECC 3DS LRDIMM, 768GB ECC RDIMM, DDR4 up to 2666MHz | ||
Memory Type | 2666/2400/2133MHz ECC DDR4 SDRAM | ||
On-Board Devices | |||
Chipset | Intel® C621 chipset | ||
SAS | SAS3 (12Gbps) via Broadcom 3008; IT Mode | ||
SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 | ||
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
Video | ASPEED AST2500 BMC | ||
Input / Output | |||
Serial ATA | 8 SATA3 (6Gbps) ports | ||
LAN | 1 RJ45 Dedicated IPMI LAN port | ||
USB | 2 USB 3.0 port (rear) 1 Type A | ||
Video | 1 VGA D-sub connector port | ||
Serial Port / Header | 1 Fast UART 16550 port / 1 Header | ||
System BIOS | |||
BIOS Type | AMI UEFI | ||
Management | |||
Software | Intel® Node Manager IPMI 2.0 NMI SSM, SPM, SUM SuperDoctor® 5 Watchdog | ||
PC Health Monitoring | |||
CPU | Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator | ||
FAN | Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors | ||
Temperature | Monitoring for CPU and chassis environment Thermal Control for fan connectors | ||
Chassis | |||
Form Factor | 2U Rackmount | ||
Model | CSE-813MF2TQC-R608CB | ||
Dimensions and Weight | |||
Height | 3.5" (43mm) | ||
Width | 17.2" (437mm) | ||
Depth | 34" (508mm) | ||
Available Colors | Black | ||
Front Panel | |||
Buttons | Power On/Off button System Reset button | ||
LEDs | Power status LED HDD activity LED Network activity LEDs System Information LED Power fail LED | ||
Expansion Slots | |||
PCI-Express | 2 PCI-E 3.0 x16 slots 1 PCI-E 3.0 x8 slot 1 SIOM card support(must bundle with network card) | ||
Drive Bays | |||
Hot-swap | 24 Hot-swap 3.5" SAS3/SATA3 drive bays 2 Hot-swap 2.5" SATA3 drive bays (rear) | ||
Backplane | |||
| Expander based backplane | ||
System Cooling | |||
Fans | 5x 8cm high-performance PWM fans | ||
Power Supply with Power Distributor | |||
1600W Redundant Power Supplies with PMBus | |||
Total Output Power | 1600W/1000W | ||
Dimension (W x H x L) | 73.5 x 40 x 203 mm | ||
Input | 100-127Vac / 13 - 9A / 50-60Hz 200-240Vac / 10 - 8A / 50-60Hz | ||
+12V | Max: 83.3A / Min: 0A (100-127Vac) Max: 133A / Min: 0A (200-240Vac) | ||
12Vsb | Max: 2.1A / Min: 0A | ||
Output Type | 25 Pairs Gold Finger Connector | ||
Certification | 80 plus Titainum Level UL/cUL/CB/CE/BSMI/CCC Certified | ||
Operating Environment / Compliance | |||
RoHS | RoHS Compliant | ||
Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
1. Dual socket P (LGA 3647) supports Intel® Xeon® Scalable Processors, 3 UPI up to 10.4GT/s
2. Up to 3TB ECC 3DS LRDIMM, up to DDR4-2666MHz; 24 DIMM slots
3. 2 PCI-E 3.0 x16, 1 PCI-E 3.0 x8, 1 SIOM card support (flexible networking) Note: must bundle with Network card
4. 24 Hot-swap 3.5" SAS3/SATA3 drive bays; 2 hot-swap 2.5" SATA3 drive bays (rear) Expander based backplane
5. Broadcom 3008 SAS3, IT mode
6. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
7. 5x 8cm high-performance PWM fans
8. 1600W Redundant Power Supplies Titanium Level (96%)